VB-11 User Manual

Mounting the Flash

The Bolt VB-Series ash units include interchangeable mounting accessories. The VB-11 has a built-in shoe

mount and a separate Stand/Tripod Mount. The VB-22 has two interchangeable shoe and stand mounts,

as well as the additional Stand/Tripod Mount. The shoe mount allows the ash to be attached to cameras,

brackets, and the like. The stand mount allows the ash to be attached to lightstands, tripods, and anything

else with a standard ¼”-20 mounting screw.

To install or remove a VB-22 mounting foot, unscrew the four screws from the base of the ash using a Phillips

screwdriver. Carefully install alternate mounting foot and secure by re-installing screws to the unit. If the VB-

22’s primary usage will be on a lightstand, it is highly recommended to use the built-in stand mounting foot.

This will provide a more stable and secure connection than that of the Stand/Tripod Mount.