VB-11 User Manual

Powering the Flash

The Bolt VB-Series ash units are powered by an external power pack, such as the Bolt PP-400DR, with a high

voltage cable via a dedicated port on the side of the ash body. The external power source is sold separately.

Connecting to a power pack:

1. Ensure the power pack and ash unit are turned off.

2. Insert one end of the high voltage power cable into the output socket of the power pack, and plug the

other end into the power socket of the ash.

3. Turn on the power pack, and then press the Power button on the ash.

NOTE: Certain power packs, such as the Bolt PP-400DR, will automatically turn the ash on when powered on.