User Manual

|
5
1. Light stand - you can mount the PP-MCX to a vertical support
like a light stand, and the clamp will support up to 2 lb. of
equipment.
2. Flat Surface - you can mount the clamp to a at surface like
a desk, and the clamp will support up to 8 lb.
1. Securely close the clamp on the surface by tightening the
locking knob.
2. Screw a stud or spigot into the appropriate threaded hole on
the clamp.
3. Securely attach the light to the stud or spigot.
1. Securely close the clamp on the surface by tightening the
locking knob.
2. Insert the power pack belt clip into the belt clip mount.
Mounting the PP-MCX
Hanging a portable power pack
Mounting a light or other accessory