PP-MCX Mounting clamp for small lights and portable power packs User’s Guide |9
Thank you for choosing Bolt. The Bolt PP-MCX is a compact yet sturdy multipurpose clamp that is an ideal tool for photographers or videographers in the studio or on location. Designed to offer durable versatility, this mounting clamp will unleash your imagination when setting up lights and other accessories. The PP-MCX features two 1/4˝-20 threaded mounting holes and one 3/8˝ threaded hole at different angles for mounting lights at a wide variety of angles.
Precautions • Please read and follow these instructions and keep this manual in a safe place. • Make sure everything is secure before proceeding. • Make sure that this product is intact and that there are no missing parts. • Do not exceed the maximum load capacity (2 lb. on light stands and 8 lb. on flat bases). • All photos are for illustrative purposes only. Specifications Dimensions (W × H × D) 2.6˝ x 1˝ x 3.5˝ (6.5 x 2.5 x 9 cm) Weight 4.6 oz. (130 g) Adjustable range 0.1˝-1.8˝ (0.3-4.
3 4 1 2 Overview 1. 1/4˝-20 threaded mounting hole (x 2) 2. 3/8˝ mounting hole 3. Locking knob 4.
Mounting the PP-MCX 1. Light stand - you can mount the PP-MCX to a vertical support like a light stand, and the clamp will support up to 2 lb. of equipment. 2. Flat Surface - you can mount the clamp to a flat surface like a desk, and the clamp will support up to 8 lb. Mounting a light or other accessory 1. Securely close the clamp on the surface by tightening the locking knob. 2. Screw a stud or spigot into the appropriate threaded hole on the clamp. 3.
Mounted on the side of a vertical surface Mounted on a light stand |6
Mounted on top of a vertical surface Mounted on a horizontal surface |7
One-Year Limited Warranty This BOLT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
