User Manual

Connecting Your Cyclone X
|
9
Connecting Your Bolt Cyclone X Power Pack to Your Flash
You can use the Cyclone X to power a wide range of ash units. To connect the Cyclone X to a ash unit,
you must use a compatible connection cable. Some cables sold by ash and power pack manufacturers are
interchangeable with Bolt cables, but other ash brands use a different connector type. Make sure you select
the right one for the ash being used.
Most compatible ash units require the standard batteries to be installed in the ash in order to power the
computer functions that allow the ash to work.
Important! Most compatible ash units require the standard batteries to be loaded before connecting
the unit to the Cyclone X. You may need to set your ash unit to recycle by drawing power only from
the Cyclone X to avoid draining the installed batteries. Check your ash unit’s manual for details on the
relevant setting.