User Manual

10
|
Connecting Your Cyclone X
To connect your Cyclone X to your ash unit:
1. Plug the metal connector of the connection cable
rmly into the output socket of the Cyclone X.
2. Plug the other end of the connection cable
securely into the compatible power port on your
ash unit and turn on the ash.
3. Press the power button on the Cyclone X and wait
for the battery LEDs to light up.
4. The LED battery level indicators will glow red to
indicate the charge level of the battery when the
Cyclone X is connected to your ash unit.
To disconnect your Cyclone X from your ash unit:
1. Press and hold the power button until the battery
LEDs turn off.
2. Unplug the connection cable from the Power Pack.
3. Unplug the connection cable from the ash unit.
1