User Manual

Connecting Your Cyclone
|
11
2. Plug the other end of the connection cable
securely into the compatible power port on your
ash unit.
3. Press the power button on the Cyclone and wait
for the Status and battery LEDs to turn on.
When the Cyclone is charged, connected to your
ash unit, and turned on, its Status LED will glow
amber and the battery LEDs will glow green to
indicate the charge level of the battery.
To disconnect your Cyclone from your ash unit:
1. Press the power button until the Status and battery LEDs turn off.
2. Unplug the connection cable from the battery pack.
Note: If you do not re your ash for 60 minutes with the Cyclone connected, the battery pack will shut off
automatically.
2