User Manual

14
|
Troubleshooting
Troubleshooting
Problem Solution
The PocketMax is charged and
connected to a flash unit, but no
indicator lights illuminate when
it’s recycling.
• Make sure the flash unit is turned on.
• Refer to your flash unit’s instructions if a setting or custom function on your flash
needs to be activated to make it draw power only from the PocketMax and not the
internal batteries.
• Make sure the connection cable is not damaged or that the correct cable is attached.
The PocketMax is not powering
the flash, and a solid green light
has appeared.
The PocketMax has become hot due to a long series of continuous flashes, and the pack
has automatically shut o to prevent overheating. Allow the PocketMax to cool before
using it again.
The red light is blinking. This indicates a malfunction. Contact the manufacturer.