User Manual

Troubleshooting
|
17
Problem Solution
The high-voltage indicator blinks three times
per second.
Surge protection has been activated. This can be caused
by ash malfunction. Turn off your ash, and restart it. If
the problem persists, take your ash to a certied
service center.
The high-voltage indicator blinks four times
per second.
This indicates that the batteries are low, and that the
P12 is taking too long to recycle the ash. Replace the
batteries in the P12.
Only one of the battery indicators is
illuminated, and it’s blinking.
There is less than 20% battery power remaining. Replace
the batteries in the P12.