User Manual

10
|
Using the P12 with a ash
Using the P12 with a Flash
The P12 provides a fast ash recycle time and hundreds of full-power ashes with each set of batteries used.
To operate your ash with the battery pack, follow these steps:
1. Install the appropriate batteries into your ash, and turn it on.
Note: The P12 provides high-voltage output when the ash is ring, but it doesn’t power the ash’s
operation or display. Batteries are required for the ash to operate with the P12.
2. If your ash does not have an auto recognition function, set the custom function to recognize an external
power source.
3. Mount the ash onto your camera’s hot-shoe mount, or make the appropriate connections to your camera
if the ash is standing alone.
4. Plug the output connector on the ash cable into the ash’s external power port.
5. Press and hold the P12’s power button until the battery indicator lights and high-voltage indicator turn on.
The P12 is now ready to power your ash.