User Manual

Inspiration strikes

CYCLONE BO-1010

AC Charger for PP-310

User’s Manual

Introduction

2 Instructions

Charging Your Cyclone PP-310 Battery Pack with the AC Charger

1. Plug the charger unit into an AC outlet.

2. Plug the charger cable into the multifunction socket on the Cyclone PP-310.

3. Charging is completed when all four green LEDs remain on.

Note: When charging the Cyclone PP-310 outside of the United States, plug adapters may be used to plug the

charger into any 100-240 V AC power outlet.

1 2

Thank you for choosing the Bolt BO-1010 AC charger.

This accessory lets you charge your Cyclone PP-310 battery pack from any 100-240 V AC power outlet.

Warnings

• Use only as instructed.

• Do not disassemble or attempt to maintain this product yourself.

• The charger may become warm during use. This is not a malfunction.

• Connect this charger only to a compatible battery pack.

• This product is not water resistant. Keep it away from rain, snow, and humidity.

• Do not store or use this product at temperatures above 104°F (40°C).

• Do not use if any wire in the cord is exposed as a result of damage or wear.

• Keep out of reach of children.

• Make sure the charger is rmly connected at both ends when charging your battery pack.

• Unplug the charger from the socket on the battery pack and the AC outlet when it is not in use.