AC CHARGER BO-1008 AC Charger for Cyclone PP-500DR / PP-5800BP User Manual
Thank you for choosing Bolt. Thank you for choosing the Bolt BO-1008 AC Charger for Cyclone DR. This accessory lets you charge your Cyclone DR battery pack from any 100-240 V AC power outlet. Warnings ⚠ ⚡ • Use only as instructed. • Do not disassemble or attempt to maintain this product yourself. • The charger may become warm during use. This is not a malfunction. • Connect this charger only to a compatible battery pack. • This product is not water resistant. Keep it away from rain, snow, and humidity.
Charging Your Cyclone DR Battery Pack with the AC Charger 1. Plug the charger unit into an AC outlet. 2. Plug the charger cable into the charging port on the battery. 3. The charge indicator light is red when the battery is being charged. 4. The charge indicator light turns green when the battery is fully charged. 1 2 Note: When charging the Cyclone DR outside of the United States, you may use plug adapters (available separately) to plug the charger into any 100-240 V AC power outlet.
Getting the Maximum Capacity from Your Cyclone DR Charge your Cyclone DR shortly before use to ensure that the battery pack retains the maximum charge. Charge your Cyclone DR at a moderate room temperature, and avoid storing it in hot environments between charge and use. Specifications Compatible battery pack: Cyclone DR Recharging time: 2.5 hours for Cyclone DR Rated input: 100-240 V AC 50/60 Hz Rated output: DC 12.6V 1.
One-Year Limited Warranty This BOLT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG6
