User Guide

5
2. How to Connect WiFi IP Camera by Hot-Spot Camhipro APP
(No Network Cable)?
2.1 Go to your cell phone’s Wi-Fi Setting -- search Wi-Fi signals -- connect the Wi-Fi.
The name of Wi-Fi Hot Spot is the UID on the camera (Wi-Fi name:IPCAM-900139
Camera default Wi-Fi Hot Spot password: 01234567
Tips:
1. Do not connect network Cable;
2. Only when the mobile phone is 3-5 meters away from the camera can the hot spot signal be
detected, please close the mobile data when connect the camera Hot Spot;
3. First time connect camera power on after 10-20 seconds for self-test;
4. If there is no camera in the list, please press and hold the reset button for 15 seconds, the
camera will be restored to factory settings;
2.2 Add Camera
Add your camera to “CamHipro” APP follow the steps of the below pictures.
Steps：
1)add device ”IP Camera”;
2)Add Device in use;
3)Scan QR Code or search nearby device;
4)QR on IP Camera bottom or search nearby devices;
5)Device information including UID user name and password (default user name and password
admin);
6)Device on line