Datasheet

SPECIFICATIONS
www.bolintechnology.com
All models and specifications are subject to change without notice.
Embedded Audio over
HDMI
Sample Rate
ASRC Conversion Range
ASRC Latency
Embedded Audio over
HDMI
Sample Rate
ETHERNET 2
USB OTG USB OTG Compliant
RS422
Control Protocol
Connector
Carrier Frequency
Supply Voltage
Pow er
Codec
System
Error
Sync
HDCP
Pow er Consumption
PoE
Pow er Adaptor
Included
Optional
Model No.
D20H
D20S
Encoder: Video Intput
HDMI
HDMI
Bit Depths
24, 16 and 32 bits per audio sample
Input Signal
Types (w hen
using the device
as an encoder)
Up to 8 channels to Dante
32k to 192k, PCM24
1:8 to 8:1
80 samples (1.6ms @ 48kHz)
Decoder: Video Output
HDMI
HDMI and SDI
Audio
Audio Transport Formats
Up to eight channels at 44.1, 48, 88.2 or 96kHz. HDCP sourced audio channels limited to 48kHz
Dante Audio over IP
HDMI 7.1 embedded audio
High-quality, low jitter w ith on-board clock generator for audio
IEEE 802.3ab compliant 1000BASE-T Ethernet port
IEEE 802.3bt Type 3 compliant, PoE++ Class 6 (60W)
IEEE 802.3ab compliant 1000BASE-T Ethernet port
HDMI INPUT (Encoder only)
HDMI 2.0 Type A connector, female; HDMI digital video/audio input
HDMI MONITOR OUTPUT (Encoder only)
HDMI 2.0 Type A connector, female; HDMI digital video/audio output
Output Signal
Types (w hen
using the device
as a decoder)
2 channels from DANTE
48K and 96K, PCM24(24, 16 and 32 bits)
Built-in 8-channel asynchronous sample rate converter
Com munication/Connector
Ethernet
Ethernet General
Standard 1Gbps Ethernet
Auto-sw itching, auto-negotiating, auto discovery, full/half duplex, Dante Controller setup and
control
ETHERNET 1 POE
HDMI OUTPUT (Decoder only)
HDMI 2.0 Type A connector, female; HDMI digital video/audio output
SDI OUTPUT
-
BNC, 75Ω,
USB 1, USB 2 (Decoder only)
USB Type-A connector, female;
USB signal extender port for connection to a mouse, keyboard
Available Pow er: 100 mA at 5 VDC
Host computer Mouse (Dante AV transmitter)
Serial Control
RS-422 compatible w ith Visca control PTZ camera
RJ45
VISCA
IR TX, IR RX
2-pin 3.5 mm
38 kHz
3.3V to 5V
PTZ Camera IR Receiver
Front and Back
LED Indicator
Board Pow ered and Active
Video Codec Active
System Status
Softw are running status
Dante Clock Slave, synchronization status
HDCP status
HDMI
HDCP 2.3, EDID
Pow er
IEC60130-10 (JEITA standard RC-5320A) TYPE4 DC pow er connector; 12VDC 4A pow er input
Netw ork-DanteAV
Netw ork
Pow ered By DanteAV Module
Standard 1Gbps Ethernet
Audio Flow x 15 Flow s / 8 Channels per Flow (unicast or multicast)
Video Flow x 1 Flow / 1 Channel per Flow (unicast or multicast)
Hardw are time-stamping, supporting sample-accurate playback
General
Pow er
Pow er input @ 4K60: 28W
Pow er input @ 4K60: 40W
PoE++, IEEE 802.3bt Type 3 class 6 compliant
PoE++, IEEE 802.3at Type 3 class 6 compliant
Input: 1.5 A maximum @ 100-240 VAC, 50/60 Hz, Output: 4A @ 12 VDC
12V DC IN has priority over Ethernet 1 POE. Ethernet 1 POE w ill become active a fraction of a second af ter 12V DC IN is
disconnected.
Heat Dissipation
Cooling fan speed adjustable, 3 Level
Acoustic Noise
NC35 or less, variable w ith cooling fan speed adjustment
Regulatory Compliance
CE, FCC Part 15 Class B digital device
Storage Temperature
-40 to 100
℃
Operating Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% (non-condensing)
Mounting
HDMI cable secure mount, surface mount for TV display, base mount.
19 inch single rack mount, 19 inch dual rack mount, Din rail mount
Dimension
216.5x148.35x44mm (LxWxH)
Weight
2.5 lbs (1.3 kg)
Enclosure
Chassis
Metal, black finish, heat dissipation surface, fan cooled; vented rear and sides