Dante AV™ Network AV Encoder/Decoder Dante AV Transceiver Joins the Dante Audio Family
D20 Series Dante AV™ Network AV Transceiver Bolin’s D20 Series device can be programmed as an encoder or a decoder. D20 Series is a single channel networked AV over IP transceiver that is fully compatible with Dante audio devices within a Dante ecosystem for HDMI sources up to 4K60Hz 4096 x 2160, with embedded audio and PTZ camera movement control via IP or IR pass-through.
D20H D20S Encoder - HDMI Input Decoder - HDMI Output Encoder - HDMI Input Decoder - HDMI & SDI Output Front Panel OVERVIEW ▪ Can be configured to operate as an encoder or a decoder via firmware upgrade ▪ Ultra-low latency real-time video performance over IP network ▪ 4K60 4:4:4 video over standard Gigabit Ethernet ▪ Use as a decoder - provides HDMI 2.
KEY FEATURES Back Panel (D20H) Lossless image with extremely low codec latency Bolin’s D20 Series Dante AV encoder/decoder incorporates a ProAV optimized implementation of the popular JPEG2000 codec in FPGA, which delivers visually-perfect lossless image up to 4K60/UHD 4:4:4 with < 10ms codec latency.
KEY FEATURES Back Panel (D20S) Implementation of HDCP 2.3 encryption Adheres to the latest HDCP 2.2 specification for High-bandwidth Digital Content Protection. Allows protected content streams to pass between authenticated devices. HDCP 2.3 over network. (HDCP not with SDI workflow) Device Control Used as a decoder, D20 Series has built-in serial (RS-422), which can be used for serial port PTZ joystick controller via Dante Serial/IR Over IP control for connected display, PTZ camera or other devices.
SPECIFICATIONS Model No. D20H Encoder: Video Input HDMI D20S HDMI Decoder: Video Output HDMI HDMI and SDI Encoder/Decoder Encoding/Decoding Device can be configured to operate as an encoder or a decoder via firmware/software upgrade. However, the device is not able to simultaneously operate as both an encoder and decoder.
SPECIFICATIONS Model No. Encoder: Video Intput Decoder: Video Output Audio Transport Formats Bit Depths Input Signal Types (w hen using the device as an encoder) Embedded Audio over HDMI Sample Rate ASRC Conversion Range ASRC Latency Output Signal Embedded Audio over Types (w hen HDMI using the device Sample Rate as a decoder) Ethernet Ethernet General ETHERNET 1 POE D20H D20S HDMI HDMI HDMI HDMI and SDI Audio Up to eight channels at 44.1, 48, 88.2 or 96kHz.
ACCESSORIES BL-PP97 97W High Power POE Injector VCC-P12-4 12VDC 4A Power Adapter B-RM11 Dual Rack Mount Kit B-RM10 Single Rack Mount Kit B-DR10 Din Rail Mount Kit B-SM10 Surface Mount Kit VCC-CC45RS RJ45 To RS232/RS422/485 Adapter B-BM10 Base Mount Kit ORDER INFORMATION • D10H (HDMI) Decoder Included: • B-BM10 (Base Mount) • B-SM10 (Surface Mount) • D20H (HDMI) Transceiver Included: • B-BM10 (Base Mount) • B-SM10 (Surface Mount) • D20S (HDMI, SDI) Transceiver Included: • B-BM10 (Base Moun
DIMENSION Unit: mm Disclaimer The information contained in this document is subject to change without notice. Bolin assumes no responsibility for any damages arising from the use of this document, including but not limited to, lost revenue, lost data, claims by third parties, or other damages. All brand names and registered trademarks are the property of their respective owners. www.bolintechnology.
