Manual

11. USB OTG

USB On The Go (OTG), reserved

12. USB 1 Port

Used to connect a keyboard

13. USB 2 Port

Used to connect a mouse

NOTE:

• The USB ports can only be used for keyboard and mouse connections - USB flash drives / hard drives

are not supported.

• Connect a USB cable (male type A USB to male mini-USB) from a USB port on a PC to the USB OTG

port of a Dante AV Encoder. When properly configured, the keyboard and/or mouse connected to the

Dante AV Decoder end can be used to control the PC connected at the Encoder location.

14. Screw Hole

15. Vents

16. HDMI 2.0 Output

17. LAN Port

RJ45 port for Ethernet connection, does not support POE power supply

18. LAN/POE++(IEEE802.3bt) for Dante Video Input

19. 12V DC Power Port

Connect the supplied DC power adaptor and cord.

Decoder Installation

The following will introduce various installation methods of the Dante AV decoder.

Before mounting your decoder, please check the included contents against the packing list to ensure

components are accounted for. Additional purchase(s) may be necessary for the optional accessories in

different installation methods.

• Disconnect the power from the decoder before decoder installation.

• Accessories such as the Single rack mount kit or Dual rack mount kit may be necessary during Rack

mounting. For more details, refer to the accessory list recommended by your dealer.

• When mounting the decoder, please install the mount kit to decoder first, and then mount the decoder

to the Rack or other installation location.

• For Surface mount kit, there are two separately parts, the outer frame and inner frame. Please install

the outer frame to the decoder bottom cover, then install the inner frame to the TV or monitor back

surface. Combine outer frame and inner frame and hook lock it.

• Tighten all the screws to hold the decoder securely.

Din Rail Mount Installation

Need to use Din Rail Mount Kit and M3*8K screws for this installation, Din Rail and Rail Mounting Bracket are

sold separately. Please following the below diagrams to do Din Rail mount installation:

Din Rail mounting method 1: