Manual

Overview

This user guide is suitable for the following models: D10H

Features

• Dante AV video streaming decoder HDMI 2.0 output

• 4K 60 4:4:4 video over standard Gigabit Ethernet

• Ultra-low latency real-time video performance over the network

• 32-bit wide video interface capable of processing code streams 200-800 Mbps

• Eight audio channels from 44.1 kHz to 192 kHz

• HDMI 7.1 embedded audio input/output

• Bit depths: 24, 16 and 32 bits per audio sample

• Tunable audio delay to facilitate lip-sync control

• Support unicast and multicast for 8 audio flow and 1 video flow

• Full support of Dante audio and video protocols

• Supported by Dante Controller

• Instant compatibility with most of existing Dante-enabled audio products

• Fully time-aligned and separately routable audio and video streams

• Visually perfect video using network efficient JPEG2000 codec

• Easy control of PTZ camera and remote devices via USB HID, serial, and IR over IP

• Fully validated implementation of HDCP 2.3 encryption

• Complete EDID support

• Firmware updateable over the network

• Works with installed 1Gbps network, no need to replace network infrastructure

• Powered via POE (25W 802.3at PoE+) or DC power (12V 4A) pack

• Compact, surface/rack-mountable design