Manual

20
4. Aim IR remote controller to decoder, you can control the Dante AV PTZ camera remotely.
5. When use IR remote controller via decoder, following features with IR control are not functional:
• Fn + Scan
• Fn + Left Limit
• Fn + Right limit
• Fn + F.Default
• Fn + STATUS
• Fn + Resolution
• WB.R plus + - adjustment
• WB.B plus + - adjustment
• PT.S plus + - adjustment
• Zoom S. plus + - adjustment
• Preset S. plus + - adjustment
• WDR plus + - adjustment
* Please turn on the IR Receive in OSD, then use the IR controller directly to face the camera if you want to
use above features.
2. When Non-Bolin Dante AV decoder is used, you may need external IR TX/RX on both encoder and decoder
side to transfer IR control signal. At the remote site where the decoder is connected to the display, use IR
remote controller to control the PTZ camera via decoder.