Datasheet

SPECIFICATIONS
www.bolintechnology.com
Format
Supported resolutions
frame rates (Hz)
Colour space
component bit width
colour sub-sampling
Format
Supported resolutions
frame rates (Hz)
Colour space
component bit width
colour sub-sampling
Standard
Embedded audio over
HDMI
Sample rate
ETHERNET 2
USB OTG USB OTG compliant
RS422
Control protocol
Connector
Carrier frequency
Supply voltage
POWER
CODEC
SYSTEM
ERROR
SYNC
HDCP
HDCP status
HDMI
HDCP 2.3, EDID
Power
IEC60130-10 (JEITA standard RC-5320A) TYPE4 DC power connector; 12VDC 4A power input
LED Indicator
Board Powered and Active
Video Codec Active
System Status
Software running status
Dante Clock Slave, synchronization status
VISCA
IR TX, IR RX
2-pin 3.5 mm
38 kHz
3.3V
Available Power: 500 mA at 5 VDC
Reserved
USB 1, USB 2
IEEE 802.3ab compliant 1000BASE-T Ethernet port
HDMI Output
HDMI Type A connector, female; HDMI digital video/audio output
USB Type-A connector, female; USB 2.0 host port;
USB signal extender port for connection to a mouse, keyboard
SDI Output
-
BNC, 75Ω,
Serial Control
RS-422 compatible with Visca control PTZ camera
RJ45
2 channels from DANTE
48K and 96K, PCM24(24, 16 and 32 bits)
Communication/Connector
Ethernet
Ethernet General
Standard 1Gbps Ethernet
Auto-switching, auto-negotiating, autodiscovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP
(SSH File Transfer Protocol), IEEE 802.1X, IPv4,Dante Controller setup and control
ETHERNET 1 POE
IEEE 802.3ab compliant 1000BASE-T Ethernet port
IEEE 802.3bt Type 3 compliant, PoE++ Class 4 (60W)
Output Signal
Types
Bit depths
24, 16 and 32 bits per audio sample
-
SMPTE 292(1.5Gb/s), SMPTE 424, SMPTE 425-A(3Gb/s),
SMPTE 2081, SMPTE 2082 With SMPTE352 SDI
Metadata Supported
SDI OUT
-
4096x2160p, 3840x2160p, 1920x1080p, 1920x1200,
1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600,
720x576p, 720x480p, 640x480
-
23.98, 24, 25, 29.97, 30, 50, 59.94, 60
-
YCbCr
-
10-bit
-
4:2:2, 4:2:0
-
12G-SDI
Built-in HDCP encryption/decryption for video
800Mbps recommended maximum bit rate
Video transport formats: Dante Video over IP
4096x2160p, 3840x2160p, 1920x1080p, 1920x1200,
1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600,
720x576p, 720x480p, 640x480
Audio
Audio transport formats
Up to eight channels at 48 or 96kHz. HDCP sourced audio channels limited to 48kHz
Dante Audio over IP
HDMI 7.1 embedded audio
PTZ Camera IR Receiver
Front and Back
Model No.
D10H
D20S
Output
HDMI
HDMI and SDI
0.5 frame (e.g. 2160p @ 60 Hz latency is < 8 ms between encoder and decoder),
Note: Overall latency may increase depending on network configurations
Color Depth
8-bit, 10-bit, 12-bit
Audio Formats
Dante Audio over IP
Bit Rates
200 to 800 Mbps
Decoding
Video Codec
Optimized implementation of JPEG2000 codec in FPGA, Licensed By IntoPIX
Dante API management interface
8-bit, 10-bit, 12-bit
8-bit, 10-bit, 12-bit
Video
4:4:4, 4:2:2, 4:2:0
4:4:4, 4:2:2, 4:2:0
Product Name
Dante AV Decoder
Dante AV Decoder
Video Resolutions
Up to 4096x2160@60Hz;
RGB 4:4:4 @ 8 bit
YCbCr 4:4:4 @ 8 bit
YCbCr 4:2:2 @ 8/10/12 bit
Copy Protection
HDCP 2.2, HDCP 2.3 for network
HDMI OUT
4096x2160p, 3840x2160p, 1920x1080p, 1920x1200,
1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600,
720x576p, 720x480p, 640x480
HDMI 2.0: HDCP 2.3, EDID
HDMI 2.0:
23.98, 24, 25, 29.97, 30, 50, 59.94, 60
23.98, 24, 25, 29.97, 30, 50, 59.94, 60
RGB, YCbCr
RGB, YCbCr
Control Protocol
Visca serial control over IP, Visca-Over-IP
Dante Ecosystem Friendly
Instant Dante Ecosystem compatibility with existing Dante-enabled products; Unified control of audio and video using
Dante tools - Dante Controller
Bandwidth
4kp60 10 bit 4:2:2; 500-600Mbps, results may vary depending on network configuration and management settings.
1080p60 10 bit 4:2:2; 150-250Mbps, results may vary depending on network configuration and management settings.
Latency
Video