DanteAV™ Network AV Decoder Pair with DanteAV™ PTZ Camera At Last DanteAV PTZ Camera Receiver Joins the Dante Audio Family
D Series 4K60 4:4:4 DanteAV™ Network AV Decoder The Bolin D Series decoder is part of the Bolin DanteAV camera system, a single-channel network AV decoder over a standard Gigabit network that outputs baseband video (HDMI 2.0 and/or 12G-SDI). Not only does it work with the Bolin DanteAV PTZ camera, but also is fully compatible with standard DanteAV video devices within the Dante ecosystem. The decoder supports video formats up to UHD/4K60 with HDCP and embedded audio.
D10H Decoder - HDMI Output D20S Decoder - HDMI & SDI Output Front Panel OVERVIEW ▪ 4K60 4:4:4 video over standard Gigabit Ethernet ▪ Ultra low latency real-time video performance over the network ▪ 32-bit wide video interface capable of processing code streams 200-800 Mbps ▪ HDMI 2.0 and/or 12G-SDI output ▪ Eight audio channels from 44.
KEY FEATURES Back Panel (D10H) Bolin D Series DanteAV decoder transports UHD 4K60 4:4:4 video over standard gigabit ethernet with ultra low latency and lossless quality. As part of Dante family, using standard network switches and CAT5e UTP wiring, D Series decoder delivers a high-performance virtual video matrix routing solution for Dante 4K video content application(i.e.: demanding conference room and classroom applications).
KEY FEATURES Back Panel (D20S) HDMI and SDI Dual Output In addition to HDMI 2.0 video output, D20S has SDI video processor built-in to convert Dante AV decoded HDMI to SDI (Up to 12G-SDI) signal for ProAV and broadcast video work flow applications. Audio transport formats: Dante Audio over IP, AES67 RTP The D Series decoder supports industry-standard AES67- compatible networked audio streams from encoders and audio interfaces.
SPECIFICATIONS D10H D20S Dante AV Decoder Dante AV Decoder HDMI HDMI and SDI Model No. Product Name Output Decoding Video Codec Optimized implementation of JPEG2000 codec in FPGA, Licensed By IntoPIX Dante API management interface Video Resolutions Up to 4096x2160@60Hz; RGB 4:4:4 @ 8 bit YCbCr 4:4:4 @ 8 bit YCbCr 4:2:2 @ 8/10/12 bit Color Depth 8-bit, 10-bit, 12-bit Audio Formats Dante Audio over IP Bit Rates 200 to 800 Mbps Copy Protection HDCP 2.2, HDCP 2.
SPECIFICATIONS Model No. D10H D20S Output HDMI HDMI and SDI Network-DanteAV Network Powered By DanteAV Module Standard 1Gbps Ethernet Audio Channels x8,Flow x15 (unicast or multicast) Video Flow x1 Hardware time-stamping, supporting sample-accurate playback General Power Power Consumption Power input @ 4K60: 25W Power input @ 4K60: 38W PoE PoE+, IEEE 802.3at Type3 class 5 compliant PoE++, IEEE 802.3bt Type 3 class 5 compliant Power Adaptor Input: 1.
DIMENSIONS Unit: mm All models and specifications are subject to change without notice. All brand names and registered trademarks are the property of their respective owners. www.bolintechnology.
