User manual

USER MANUAL
4
Pin 9-10: PTZ Control port ( pin 9: RS-485A; pin 10: RS-485B).
2.3 Remote Controller(Only for reference)
Chapter 3: DVR Installation
3.1 Hard Disk Installation
Caution： Please do not take out hard-disk when DVR is running!
(1) Open DVR upper cover carefully;
(2) Insert Power Cord and data cable into Pin of hard-disk tightly;
(3) Put the upper cover back carefully.
3.2 Camera and Monitor Connection
Connect camera signal to video input of DVR, and video output of DVR to Monitor via BNC
connector (Refer to section2.2-Rear Panel).
3.3 Power Supply connection
Please only use the power adapter supplied with the DVR itself.
POWER:
Power switch
REC:
Manual Record
2x2:
Quad display
0~9:
Channel Select /
Number input;
AUTO:
Dwell time ( Sequential
Channel Switch) Display
DISPLAY:
Switch Display Mode
SEARCH
Search Recording
ZOOM:
Zoom in/out Function in
a special area
BACKUP
Backup record file;
MUTE:
Turn on or off Audio
output on the spot mode
or Playback Mode
▲，▼，◄，►
Direction Keys
PTZ:
Enter / PTZ Control
MENU
Menu
SELECT
Select
ESC
EXIT
Z+，Z-:
Zoom in / out
F+，F-
Focus control
►
:
Play / Pause
■:
Exit play mode
◄◄
Rewind
►►
Forward
◄:
Previous frame
► :
Next frame