User manual

USER MANUAL
16
5.5.1 Time search
Press [◄or►] key to move the cursor and press [▲or▼] key to adjust the value。After
finishing the above setup, press [Enter] key to play the record.
5.5.2 Event Search
5.5.3 Urgent search
5.5.4 Record playback
On playback mode, press [► ] button to play or pause a recording,[ESC] key to quit
the playback mode, [◄◄]or[►►] button to rewind/forward the record. DVR can support
multiple play speeds (X2, X4, X6,X8 and X10) for rewinding or forwarding, also supports
single frame rewind or forward play.
NOTE: On playback mode, [◄and ►] keys on the front panel or [ ◄or► ] on the screen
/remote controller are used to play a record frame by frames.
If recording file is too short (e.g. 10s or 20s), play speeds (X8 and X10) are not available.
5.6 Motion Trace
Turn on or off motion trace function. When any object is moving on motion detection
area, the tracer which the object located at will display in red.
Note: The function will be available only when turning on Motion detection mode,
setting detection area and turning on motion trace of the channel.
EMERGENCY SEARCH: Search the
manually record images Press [▲or▼] key
to select a file, and then press [ENTER] key
to start playing.
1).TIME SEARCH: Search the recorded
images according to the accurate time.
2).EVENT SEARCH: Search the recorded
images according to the recording type.
Press [▲/▼] key to select the file, and
[ENTER] key to start playing.