User manual

USER MANUAL

5.3.8.6 Log Set

5.3.8.7 Disk Format

If net-viewer have been connected, please break this connection before format.

5.3.8.8 Firmware Upgrade

You can proceed firmware upgrade on DVR via USB Thumb Drive. Please restart DVR

and restore all the factory default setting after successful upgrade.

5.3.8.9 Restore the factory default

Move cursor to the Menu and click left key of Mouse or [Enter] key of Remote

Controller to restore factory default.

CAUTION: You must restore the factory default after upgrade!

5.3.8.10 Language Select

You can change the OSD language from the default language to other languages

5.4 Display Mode

DVR supports multiple display modes, such as 2x2, PIP1 and PIP2. And press

[Display mode] key on remote controller / main menu to switch display mode.

5.5 Search Setup

DVR supports three search modes:

Time search 、Event search and Urgent

search.

Press [SEARCH] key on front panel or

main menu to enter into search menu.

Select the recorded file and press

[ENTER] key to play the file.

Log set determines what information DVR will

be written into the system log file.

Firstly select disk which you want to format, and

then press [ENTER] key to format the HDD.

Caution: if you format the hard drive, it will erase

all the data in the hard-disk.