User manual

USER MANUAL
14
5.3.8.1 Time Set
Date format: YY/MM/DD for Asia; DD/MM/YY for Europe; MM/DD/YY for USA.
Please press [◄/►] key to move cursor and press [▲/▼] key to adjust values.
5.3.8.2 System Password
Once you set system password, you will have to input the new password when entering
menu or log in network. Please remember the modified password firmly. If you forget the
password, please feel free to contact our customer service for assistance.
5.3.8.3 System Info
5.3.8.4 Video System
5.3.8.5 Log View
There are three time format options. We
setup different time format according to
different zone.
Input new password and confirm the
password. The password supports up to eight
characters or number. Detail setting methods
please refer to the section 5.3.1.2
Firmware Ver.: Firmware version of DVR.
HDD overwrite: ON/OFF. If you choose
“ON”, recording continues and overwrites
previous recordings when the hard drive is full.
If you choose “OFF”, the recording process will
stop recording when hard drive full.
In this window you can check related
log information of DVR, e.g.: system
booting, motion detection 、 sensor
triggered、manual record etc.
Press [◄or►] key to select PAL or NTSC.
Please select the set according to camera.
VGA Solution indicate monitor solution
when VGA port connected to Monitor,
including four choices-640*480、800*600、
1024*768、1280*1024.