User manual

USER MANUAL
10
to quit and exit the menu.
5.3.3.2 Motion Area
area that is not being detected while transparent blocks are the areas under detections
The [Clear] menu allows you to clear the designated detecting area.
The [ESC] menu allows you to quit the Menu. All the changes will be saved.
5.3.4 Sensor
Note: The DVR systems do not include external Sensor and Alarm.
Sensor type: System supports Normal-Open and Normal-Close.
Post Record time: The option allows you to define the recording time after sensor is
triggered, the setting value can be changed from 5 、10、15、20、25、 30、 35、 40、 45、
50、 55、60 seconds or off.
Sensor type: The option allows you to select Normal Open and Normal Close.
Buzzer time: The option allows you to define how long buzzer will sound when sensor is
triggered, the setting value can be changed from 1 to 60 seconds or off.
Alarm time: The option allows you to define how long external alarm will last when
sensor is triggered, the setting value can be changed from 1 to 60 seconds or off.
5.3.5 Schedule
Move cursor to “SENSOR” icon, press [ENTER]
key to enter into sensor setup menu.
Sensor channel: Press [◄ or ►] to select
channel. While selecting [ALL], it means configuring
all channels at the same time.
Sensor type: System supports Normal-Open and
Normal-Close.
The option allows you to set record schedule
freely. Referring to the schedule, row “0~24”
stands for 24 hours for one day, and column
stands for seven days for one week.
Move cursor and select “Motion Area”, and
then press [Enter] key to enter into motion area
setup interface.
Press [MENU] key or right key of mouse to
popup “select/clear/exit” menu, press [select]
and [ENTER] key, move cursor to setup motion
area. Green blocks represent the