User manual

USER MANUAL
8
5.3.1.2 Title
the title you named, and then press [ESC] key to exit.
Please note that Title support up to eight characters or digital number.
5.3.2 Record
you are allowed to setup resolution.
FPS: The option allows you to set record frame rate, Details please refer to section
5.3.2.1.
Quality: System supports four levels: low、standard、high、highest. The higher the
quality is, the clearer the image is. This will require more HDD space.
Record mode: The option allows you to adjust record mode such as off (no record),
always (continuous record), motion (motion record), sensor (sensor record), schedule
(schedule record).
Audio: Bind one audio channel to a designated video channel, you can select from 1
to 4 or off.
Press [ESC] key to exit menu, and if you want to save the above setup, please press
[Enter] key.
5.3.2.1 Set FPS
Channel: Press [◄ or ►] key to select channel.
When selecting [ALL], that means configuring all
channels at the same time。
Resolution: The option allows you to set
resolution. System support CIF(PAL:100frames /
NTSL: 120frames) and HD1 (PAL:50 frames /
NT
S
L:
60
fr
a
m
es
)
.
O
nl
y
th
e
c
h
a
nn
e
l i
s
se
t t
o
“ALL”
,
Press [◄or►] key to move cursor to
[FPS] and press [Enter] key to enter into
sub menu (shown as the left picture):
On NTSC mode, total frames of CIF
Move [▲ or ▼] key to [Title] Menu and press
[Enter] key to enter into title setup interface. On
the setup interface, move direction keys to
select digital numbers or characters and then
move the cursor to [ENTER] key in the
[keyboard] menu to confirm the numbers or
characters you selected, then press it to save