USER MANUAL + 0
USER MANUAL CONTENTS Chapter 1: Features..................................................................................................................................................2 Chapter 2: Layout ....................................................................................................................................................3 2.1 Front Panel ............................................................................................................................................
USER MANUAL 5.5.1 Time search..............................................................................................................................16 5.5.2 Event Search............................................................................................................................16 5.5.3 Urgent search...............................................................................................................................16 5.5.4 Record playback ......................................
USER MANUAL Safety Instruction General safety 1. Use proper power source. Do not operate this product from a power source that applies more than specified voltage (100-240V AC). 2. Never insert anything metallic into the DVR case. Putting something into the DVR case can be a source of dangerous electronic shock. 3. Do not operate in wet & dusty or use near water. Avoid places like a damp basement or dusty hallway. 4. Do not expose this product to rain or use near water.
USER MANUAL Chapter 1: Features DVR Features z H.
USER MANUAL Chapter 2: Layout 2.1 Front Panel 1 1-4: Numeric keys1-4/Channel Select 10 2 SEARCH: Search key 11 :Esc/Display all ◄ :Left 3 : Rewind 12 :Down 4 : Play/Pause 13 : Right 5 : Fast Forward 14 : UP 6 : Stop key 15 :PTZ control/Enter 7 : Manual Record 16 HDD indicator 8 0/MUTE: Numeric Keys 0/MUTE 17 Power indicator 9 MENU: Menu key 18 Power Switch 2.
USER MANUAL Pin 9-10: PTZ Control port ( pin 9: RS-485A; pin 10: RS-485B). 2.
USER MANUAL Chapter 4: DVR Boot up 4.1 System Initialization After connecting the power adapter and turning on the power button, the system will boot-up and start initializing. SYSTEM IN INITIALIZATION…… System will detect mouse, initialize file system and recording parameters etc. If net-viewer is connected, please break this connection first when system booting-up 4.2 Display mode After finishing initialization, DVR will enter into display Mode (shown as left picture).
USER MANUAL Chapter 5： DVR Menu 5.1 Main Menu On Display Mode, press the [Menu] key on the status bar or on front panel to enter into Main Menu (Shown as left picture). 5.2 Menu Preview Menu Directory Camera Record Motion Sensor Schedule Network Backup System Setup Display Search Trace Main Menu Zoom PTZ Rotation Audio Quit 5.3 Setup On display mode, press [Menu] key to select and enter into setup menu. The option allows you to setup parameters for Camera, Record, Motion and Sensor etc.
USER MANUAL 5.3.1 Camera Channel: Press [◄ or ►] key to select channel. When selecting [ALL], that means configuring all channels at the same time. Color: In order to get the best video image, the option allows you to adjust parameters such as brightness, saturation, contrast and hue etc. Details please refer to Section 5.3.1.1. Title: the option allows you to define the name of each camera. Details please refer 5.3.1.2. PTZ Protocol: Press [◄ or ►] key to select protocol, from PELCO-D to PELCO-P.
USER MANUAL 5.3.1.2 Title Move [▲ or ▼] key to [Title] Menu and press [Enter] key to enter into title setup interface. On the setup interface, move direction keys to select digital numbers or characters and then move the cursor to [ENTER] key in the [keyboard] menu to confirm the numbers or characters you selected, then press it to save the title you named, and then press [ESC] key to exit. Please note that Title support up to eight characters or digital number. 5.3.
USER MANUAL format is 120 frames, and HD1 format for 60 frames, and on PAL mode, total frame of CIF for 100 frames, HD1 for 50 frames. You could select to manually setup frame rate on GROUP mode, and on AUTO mode system automatically allocate frames (Under this mode, you couldn’t modify the frames). On NTSC mode, max frames for each channel should be 30 frames.
USER MANUAL to quit and exit the menu. 5.3.3.2 Motion Area Move cursor and select “Motion Area”, and then press [Enter] key to enter into motion area setup interface. Press [MENU] key or right key of mouse to popup “select/clear/exit” menu, press [select] and [ENTER] key, move cursor to setup motion area. Green blocks represent the area that is not being detected while transparent blocks are the areas under detections The [Clear] menu allows you to clear the designated detecting area.
USER MANUAL Move cursor to any time point on the schedule, and press numeric key 1 (always)/2(Motion)/3(Sensor)/4(off) on front panel or the corresponding icon of screen and [menu] or [select] key to select record mode. 5.3.6 Network IP Mode：This option allows you to set system network type to DHCP or static. Once ◄► ◄► you set to static allocation, you will manually setup IP address, Gateway, Net Mask etc.
USER MANUAL IP address is same as intranet, as for Protocol, please select [All] and tick “v” at Enable column. 5.3.6.2 DDNS DDNS is mapping dynamic IP address of router to fixed domain name, and we support free DDNS service of www.dhs.org. Take www.dhs.org for example, applying steps are as follows: Open website of www.dhs.org→Signup→Login→Click ‘/hosts’→Click ‘Add’→Choose ‘Hostname Type’: ‘Dynamic Host’→Click ‘Next’→Input Hostname→Click ‘Add’.
USER MANUAL 5.3.6.3 E-MAIL Please firstly open Email server, and fill in DVR name, which you can freely define, and address at [EMAIL FROM] and [EMAIL TO] column. 5.3.7 Backup [Backup] menu will be available when only plugging USB Thumb drive (shown as left picture.): Disk ： Select HDD your backup file located at. Device：USB Thumb drive Channel: Select any channel which you want to backup. Start: indicate start time you need to backup. End: indicate end time you need to backup.
USER MANUAL 5.3.8.1 Time Set There are three time format options. We setup different time format according to different zone. Date format: YY/MM/DD for Asia; DD/MM/YY for Europe; MM/DD/YY for USA. Please press [◄/►] key to move cursor and press [▲/▼] key to adjust values. 5.3.8.2 System Password Input new password and confirm the password. The password supports up to eight characters or number. Detail setting methods please refer to the section 5.3.1.
USER MANUAL 5.3.8.6 Log Set Log set determines what information DVR will be written into the system log file. 5.3.8.7 Disk Format Firstly select disk which you want to format, and then press [ENTER] key to format the HDD. Caution: if you format the hard drive, it will erase all the data in the hard-disk. If net-viewer have been connected, please break this connection before format. 5.3.8.8 Firmware Upgrade You can proceed firmware upgrade on DVR via USB Thumb Drive.
USER MANUAL 5.5.1 Time search 1).TIME SEARCH: Search the recorded images according to the accurate time. Press [◄or►] key to move the cursor and press [▲or▼] key to adjust the value。After finishing the above setup, press [Enter] key to play the record. 5.5.2 Event Search 2).EVENT SEARCH: Search the recorded images according to the recording type. Press [▲/▼] key to select the file, and [ENTER] key to start playing. 5.5.
USER MANUAL 5.7 Area Zoom in/out The option allows you to enlarge a special area and view the area more clearly. Select a channel and then select the option. At this moment you could enlarge the selected area by sliding mouse. Please note sliding area can’t overtake full screen, otherwise, the picture will turn back the original ones. Click the right button of mouse, double-click left button or press [ESC] key to exit the [Zoom] function. 5.
USER MANUAL Chapter 6： NetViewer Program 6.1 Installation Procedure 1. 2. 3. 4. Insert the software CD into your CD-ROM drive; Open the CD file; Double-click the setup file to run the installation program; Follow up the instruction to finish the installation step by step. 6.2 Program Main Interface 1. PTZ Control buttons ：These button allows you to control PTZ cameras; 2. Network Connection: Press the button to connect or disconnect network; 3. Net-viewer Program setup: Setup the software parameter; 4.
USER MANUAL 10. File Play Mode: Play recording backup; 11. Display mode switch: The button allow you to switch to different display mode. 6.3 Login- in System 1）．Press “ ” button to enter into the below setup windows: Host Name：indicate device name you want to visit remotely. You can setup the hostname freely. Host Address: indicates Remote IP address of DVR, and the address is same as network IP address of DVR.
USER MANUAL Local rec Path: indicate recording save path. Set channel size: Setup size for each channel on the screen. Open Log function: The option allows you to open or close Log function. When opening the function, you will find Log file for every operation through the local save path. AVI Save: The option allows you to setup video size, video source and frame/sec. AVI Codec: Select a AVI codec program to proceed video stream processing; Please click [OK] key to save the above parameter setup.
USER MANUAL 2）．Remote playback: After successful connection, click “ ” icon to enter into remote playback mode. Input a specified time of recorded file that you want to search, and click [ play the recording file. If you want to playback the other recording, press[ modify the specified time, and then click [ you also press [ pause] / [ Reset] and [ previous Frame] / [ Play] to remote pause] button and Play] button. And on playback mode, next frame] to control the recording file.
USER MANUAL Chapter 7：Specification 4-CH DVR Item Description System NTSC/PAL Video Input/Output 4-CH Input / 1-CH Output Audio Input/Output 4-CH Input / 1-CH Output Display Record Resolution NTSC：720×480@30fps(Each CH) PAL：720×576@25fps(Each CH) Feature Full-D1 / Quad Display/ PIP, Single-CH Seq. Display Resolution NTSC：720×240,360×240 PAL：720×288, 360×288 Feature Frame rate adjustable Quality 4 Level(Highest, High, Normal, Low) Audio ADPCM2 Codec Video H.
USER MANUAL Chapter 8: Appendix 8.1 System Connection Diagram 8.
USER MANUAL The material in this document is the intellectual property of our department . No part of this manual may be reproduced, copied, translated, ٛ transmitted, or published in any form or by any means without our department prior written permission. ٛ Our products are under continual improvement and we reserve the right to make changes without noti ce. But no guarantee is given as to the correctness of its contents. ٛ We do not undertake any responsibility for the harms cause by using our product.
