User`s manual

Orion ISS
www.bolid.com 34
To assign the S2000-K keypad to the list of partitions provided that users will be authorized via enter-
ing their PIN codes directly from the keypad, drag and drop the relevant partition descriptors from the
bottom window on the keypad descriptor in the Device Rights window as shown in Figure 5.
To control partitions by the combined way of authorization/control, firstly assign the controlled partition
(partitions) to a device whose reader will be used for user authentication. (In our example it will be the
S2000-KDL – see Figure 7.) Then select the device in the Device Rights window and define its "Link a
Reader to" parameter in the Inspector window specifying the S2000-K in question as the device which
is supposed to control partitions after user authentication by means of presenting access device to the
reader of the specified S2000-KDL.
Figure 6
Programming the Mechanism of Translating Events
To program the network controller to translate events to the specified S2000-K do the following:
ØDefine in the controller database the list of partitions which events will be translated to the
S2000-K, then
ØSpecify the S2000-K as the device which the events will be translated to, and
ØDefine the types of events that are enabled to be translated to the S2000-K for displaying