User`s manual

Orion ISS
www.bolid.com 32
Figure 4
Also, you can add the S2000-K descriptor to the console database by means of the tool from the
Devices window toolbar, defining all the keypad parameters manually.
Programming the Console for Receiving Commands from the Keypad
In order to use the S2000-К as a device for input user control commands, define in the console data-
base:
ØRights of specific users to control specific system partitions, and
ØRights of the keypad to be used as a device controlling these partitions
User rights are defined by means of including users to Access Groups programmed for the console
and assigned to these partitions as well as available operations for these partitions, namely arming
and disarming, arming only, disarming only, or status observing only. Users are authenticated in an
Orion system via programmed digital PIN codes or registered electronic access devices such as iBut-
tons or Proximity cards. Presenting a user authenticator to one of the system reader is treated as a