User`s manual

S2000-К Operating
21 www.bolid.com
TRANSMITTING S2000-K EVENTS TO THE NETWORK CONTROLLER
The S2000-K keypad automatically transmits the network controller which this one is connected to the
messages about its current status such as:
DEVICE RESET
TAMPER ALARM The device enclosure has been open
TAMPER RESTORED The device enclosure has been closed
The keypad provides buffering of events that should be transmitted to the network controller via RS-
485 interface in case of communication loss. After a minute since an event has occurred but not
transmitted the event is assigned to a time in accordance with the internal keypad clock. The event
buffer capacity is 16 events.