User`s manual

Orion ISS
www.bolid.com 82
code is not stored in the controller memory on the contrary to codes of individual keys. The base code
can be typed manually or read by presenting to a reader a key fitting the pattern.
The Code Mask parameter specifies digits of the base code which are significant while presented
keys being identified (that is ‘opened’ digits which values must be equal both for the base and the
presented key) and are mindless and ignored by the controller (that is can differ for different keys).
‘Opening’ and ‘closing’ of digits are implemented by double click of the mouse left button on the rele-
vant digits of the pattern base code in the Pattern Base Code field, on the Key Pattern tab of the
UProg Configuration Tool for the S2000-2 controller. ‘Opened’ digits in base code are showed by
black while ‘closed’ digits which will be ignored are shown by light gray color.
The Access Group (the number of the access group) defines the access rights and limitations for the
User key, as well as its rights to arm/disarm loops (see Access Rights Section of this Manual). The
Master key access group is inherited by all the keys programmed by hardware (see Key Programming
Section of this Manual).
If the Validity Limitation parameter is used, the dates between which the key pattern is valid have to
be set by the Validity Period parameter. Otherwise the key pattern never expires.