User Manual

MODEL 12206
8HP MODEL TILLER
TRANSMISSION HOUSING, COVERS, SEALS, GASKETS AND PLUGS
REF
No.
PART
No.
DESCRIPTION
QTY.
REF
No.
PART
No. DESCRIPTION QTY.
1 9621 Oil Seal-double lip, wheel shaft, 13 1916199001 Cover-tiller housing, left side ... 1
right and left sides ..................
2 14
1129-1 Gasket-tiller housing cover, .010
2 9726 Plug-pipe, 1/4, oil level hole and (fits all covers)........................ A/R
gear oil drain hole ...................
2
15 1915089 Screw Kit: includes three (3)
3 97076
Seal-transmission bore .............. 1 1/4-20 X 7/8“ self-sealing
4 1186329 Screw-flanged hex hd., screws ..................................... A/R
5/16-18x3/4* .............................
6 161900881001 Cap-rear bearing ........................ 1
5 85030
Oil Seal-input pinion shaft ......... 1 17 1124-2
Gasket-rear bearing cap, .010
6 1916193001 Cover-top of transmission .........
1 thick ......................................... A/R
7 20694 Gasket-transmission top cover . 1 18
1186331
Screw-flanged hex hd.,
8 20893
Transmission case, tube and rear
5/16-18x1*................................ 4
housing assembly................... 1
19
1915087
Screw Kit: includes five (5)
9
9467
Plug-gear oil fill hole ..................
1
1/4''-20 X 5/8" self-sealing
10
1917101001 Plate-wheel drive cable mounting. 1
screws .....................................
A/R
11
97073
Oil Seal-tiller shaft, left and right
20 This Ref. No. not used
sides......................................... 2 21
1100243 Lockwasher-3/8 ......................... 2
12
90038
Screw-flanged hex hd.. 22
1100068
Screw-hex hd., 3/8-16 x 3/4* ......
2
5/16-18x5/8* ............................. 2
* Specify GRADE 5 if ordering part locally.
A/R-As Required
11