Instructions / Assembly

step 1:

Insert smaller handles poles into larger

and align the two holes as shown

step 2:

Place 2” bolts in 3rd hole from handle grips.

step 3:

Add center brace and front handle brace

NOTE: Put the 2” bolts through the center

brace, then lay ﬂat with the threads up

and then place handles on top.

step 4:

Add legs to the base by aligning the holes on the legs

as shown below, then hand tighten bolts. Next, add leg brace

with 1/2” lip on the bottom. Use 3/4” bolts. See how holes

are aligned below.

front hole

back hole

front handle brace

center brace