Instructions / Assembly

Quick tips:
For easy assembly, put the entire unit
together and hand tighten only. This will
allow you to align the holes and the parts
easier. After fully assembling the unit, make
sure to completely tighten all bolts before
using.
-2, 2 1/2” bolts are for the back holes on the
top. Make sure to use the washer wedge
between the handles and top to insure
that you will not bend the top when tightening.
-2” bolts are for the axle brackets, center
brace, front handle brace and legs.
-3/4” bolts are for the leg brace and to attach
the front support to the top.
2