User manual

Right Menu
Utilities Menu is used
at installation to set
up basic monitor
behavior.
Note: Not all inputs
are installed in all
models (see back
panel for available
input connectors).
Utilities Menu Note: ">" indicates a sub-menu (use button to Enter)
Setup >
Auto Picture Setup: Auto adjust the image position, phase and size
Auto Color Gain: Auto Color Calibration (RGB white levels)
Wide Screen Mode detection : Choose which aspect wVGA mode to use:
- Off
- 1280x768 Widescreen
- 1366x768 Widescreen 16:9
Manual Clock : Adjust the image horizontal size
Manual Phase : Adjust image quality (fine tune the data
sampling position)
Auto Source Seek >
Auto
ON: The monitor will Seek another input if a signal is lost or missing.
OFF: Seek function is disabled (No inputs will change except by choice)
Setup >
HD/SD SDI 1
Choose to display and Auto Detect
HD/SD SDI 2 signals (if ASS=On) for these inputs.
VGA
DVI
HD Component
Composite 1
Composite 2
S-Video
SD Component
Note: only the names set to ON will display within the Input Select Menu.
Auto Power > (also known as: DPMS)
(Automatic monitor power Off for missing signals; power auto On when signal returns)
ON: Enable soft power off in absence of an input signal
OFF: Disable soft power function
Video Standard (SD)* > Auto / NTSC / NTSC 4.43 / PAL / PAL M / SECAM**
Image Orientation > Normal / Horizontal Flip / Vertical Flip / Rotate
Gamma > 1.8 / 1.9 / 2.0 / 2.1 / 2.2 / 2.2 / 2.3 / 2.3 / 2.4 / 2.5 / 2.6
OSD > (
On Screen Display menu system)
** Standard Definition
OSD Position >
H POS move the OSD menu box horizontally
V POS move the OSD menu image vertically
OSD Timeout > OSD menu timeout period, 5 to 60 seconds
Note: Selecting "0" time keeps display ON until Menu button is used to exit.
Transparency Sets OSD to Transparent or Opaque background.
Display Input Enables source ID in upper right corner for 10 sec.
Freeze [Enter] Green dot indicates frozen image; push again to unfreeze.
Zoom > Zoom Level 0 - 100 Magnifies the image.
Horiz Pan -100 - +100 Moves the view window L/R.
Vertical Pan -100 - +100 Moves the view window U/D.
Reset Returns Zoom and Pan to off.
7 122008 10b VIEWPORT Manual dhd/xd/d