User manual

ManualsBrandsBoland ManualsComputer equipment& 15DB

VIEWPORT Monitors

Digital HDTV LCD Video Monitors

HIGH DEFINITION MODELS

HDTV: SDI & YPbPr: 1080/720 i/p/sF (23~60 Hz)

SDTV: NTSC/PAL/SECAM, NTSC4.43/PAL-M

Full PC VGA-DVI Support EGA through WUXGA

4:3, 16:9, Variable Aspect Ratios

H & V Scan Reverse

Picture-in-Picture

User Manual

for Models:

6.5"- DHD65DB & LED

8.4"- DHD/DVI 84HR & 84DB

9.0"- DHD9W

10.4"- DHD/DVI 10HR

12.1"- DHD/DVI 12 & 12DB & DBLED

15"- DHD/DVI 15, 15W, & 15DB

17" & 17"W- DHD/DVI 17W & 17DB

19"& 20"W- DHD/DVI 19 & DB 20W & DB

24"& 26"- DHD/DVI 24 & 26

32" & 37"- DHD/DVI 32 & 37

42" & 47"- DHD/DVI 42 & 47

55"- DHD/DVI 55

including: -x1, -x2 Rackmounted versions

Lake Forest, CA 92630 (800) 918-9090 (949) 465-9911 Fax: (949) 465-9944 www.bolandcom.com

10 b V IEWP ORT Manual DHD-DVI 121908

Summary of content (12 pages)

PAGE 1
VIEWPORT Monitors Digital HDTV LCD Video Monitors HIGH DEFINITION MODELS HDTV: SDI & YPbPr: 1080/720 i/p/sF (23~60 Hz) SDTV: NTSC/PAL/SECAM, NTSC4.43/PAL-M Full PC VGA-DVI Support EGA through WUXGA 4:3, 16:9, Variable Aspect Ratios H & V Scan Reverse Picture-in-Picture User Manual for Models: 6.5"- DHD65DB & LED 17" & 17"W- DHD/DVI 17W & 17DB 8.4"- DHD/DVI 84HR & 84DB 19"& 20"W- DHD/DVI 19 & DB 20W & DB 9.0"- DHD9W 24"& 26"- DHD/DVI 24 & 26 10.4"- DHD/DVI 10HR 32" & 37"- DHD/DVI 32 & 37 12.
PAGE 2
Description 1 description • overview The BOLAND Combi VIEWPORTS are high performance LCD video displays for computer and motion video display. The display quality is excellent for both natural and graphic video. The moni- • standard features (included in all models) SR: Scan Reverse. Picture may be mirror-imaged Horz, Vert, or both for prompting or other effects. Image may also be rotated 90° AR: Aspect Ratio. Display may be switched between 4:3, 16:9, or adjustable user settings (1.85, etc.
PAGE 3
Installation 2 installation • supplied items Supplied with your LCD Monitor is a desk-top universal 100-250 VAC, 50/60 Hz AC to 12 volt DC regulated power supply, power and VGA cords, and this instruction manual. Outside the US, a • local power cord may be needed. Available options may include: SDI, High Brightness (1850 nts), Remote Controls, and VESA-, Rack-, Wall- Mounts, and Desk Stands. handling A VIEWPORT display is rugged.
PAGE 4
Installation • system requirements VIEWPORT monitors operate on DC power and display PC video with a 15 pin VGA connector, composite video signal with BNC, or S-Video with a 4-pin mini-DIN (or "S") connectors. for use as connected to all normal baseband video systems. (The "C" component of the Y/C signal is 0.7 Vpp nominal.) Monitors will display a composite or SVideo from a 525 or 625 standard video signal at a nominal 1.0 Vpp (when properly 75? terminated, where source video is 2.
PAGE 5
Installation • computer connections The "VGA" connection may be made with the supplied cord, plugging a cord into the back of the monitor and into the (back) of the computer. Supply the monitor with a CGA (320 x 480) up to a WUXGA (1920 x 1200) signal. A built-in processor will adjust the image automatically to fit the screen. Connector Well, typical of 10.4 to 20" Monitors See Page 10 for operation of the fan switch located here. Breakout Cable, VGA to 5 BNCs. VGA input also accepts YPbPr.
PAGE 6
Operation Controls and Connections Monitor Front Side: Monitor Back Side: 1 1 Power On/Off When power is applied, the monitor will come on. This button then turns the monitor on and off. 2 (Recessed wiring location for all cables) Place the plug from the world-wide AC power supply (included) into the DC 12V connector. Input power to the monitor from any other source must be within the DC Voltage range marked on the monitor label or backside markings. (Some monitors will accept 9~36 VDC).
PAGE 7
OSD Menu Functions Note: Software updates may enhance these menu offerings (0.45.70 and later). Picture Menu Left Menu NOTE: Monitor factory signal calibration settings are: 50 / 50 / 50 / 0 / 0 Backlight slider can be used to calibrate monitor brightness to SMPTE 25 footlamberts value. Many menu functions can have speed access with Hot Keys (see HK1 and HK2 in Utilities Menu).
PAGE 8
Utilities Menu Note: ">" indicates a sub-menu (use button to Enter) Setup > Auto Picture Setup: Auto adjust the image position, phase and size Auto Color Gain: Auto Color Calibration (RGB white levels) Wide Screen Mode detection : Choose which aspect wVGA mode to use: - Off - 1280x768 Widescreen - 1366x768 Widescreen 16:9 Right Menu Utilities Menu is used at installation to set up basic monitor behavior.
PAGE 9
Utilities Menu (continued) Color Temperature > 5000 6500 8000 9300 Right Menu Utilities Menu is used at installation to set up basic monitor behavior. Red Gain Green Gain Blue Gain Red Bias Green Bias Blue Bias > > > > Load Defaults : 0-100 0-100 0-100 -50 - +50 -50 - +50 -50 - +50 Restores initial factory Color Temperature value sets. Hot Keys > Sets operation of button pairs ( [2], [1]) to access functions directly when OSD menu is not visible.
PAGE 10
Operation High Bright Monitors Description The High Brite Option is a factory-installed accessory for an LCD video monitor to boost its brightness to full daylight readability. The 6, 8, 12, 15 an 19"" displays are specified at 2150, 1400, 1650, 2100, and 1650 nts (cd/m²) respectively. Operation In addition to the standard button controls of a normal monitor, the menu, a button, or optionally a knob may be found on the front panel to control the brightness of the internal lamps.
PAGE 11
Maintenance 4 Maintenance A VIEW PORT display requires regular/periodic maintenance. no • Cleaning The standard cabinet finish is semi-gloss black paint over aircraft aluminum, or the aluminum cabinet itself is mil-spec blackdye anodized. Up to 20" screens are non-glare glass. A damp (not dripping) cleaning cloth with a small amount of spray cleaner (such as 409®, or Windex®) may be used to remove dust or fingerprints.
PAGE 12
Warranty BOLAND COMMUNICATIONS WARRANTY AGREEMENT All products, including hardware, software, firmware, and documentation are subject to the terms below. Opening the monitor cabinet in any manner for any purpose voids the warranty. 1 . Boland Communications (Boland) warrants the VIEWPORT LCD Monitors and their accessories are provided to be free from defects under normal use. Parts are covered for a period of two (2) years and Labor is covered for one (1) year from the date of delivery to you. 2 .