Data Sheet

The mixer shall be the Bogen VMIX, or equivalent,
with 8 module bays capable of accepting advanced
plug-in modules, with 2 bays capable of accepting
signal-processing plug-in output modules. Each
channel shall have its own independent volume
control, and LED signal/clip indicator. The mixer
shall have a master volume control, bass and
treble controls, an 11-segment LED output level
meter to monitor the output level of the mixer with
Avg/Peak meter switch.
The mixer shall have an unbalanced output jack, a
125 Hz Low-cut feature, tone control bypass
switch (balanced transformer-isolated output),
balanced output signal level switch (-50, -10, and
+4 dBμ), resettable circuit breaker, power indicator,
and grounded unswitched AC convenience recep-
tacle with a 500W maximum capacity provided for
external equipment.
For larger applications, the mixer shall be able to
bridge to another mixer using a built-in bridging
jack and mute terminals, allowing the number of
inputs to be increased.
The mixer shall have a motorized volume control
that can be remotely operated (with RVCP Remote
Volume Control Panel).
The mixer shall be rack mountable (with RPK87
rack mounting kit). Security covers shall be avail-
able to protect volume, bass, and treble controls
(with PVSC); and 8 security covers shall be included
to prevent tampering with module controls or to
cover empty module spaces (with PVMC). The
mixer shall have a three-year warranty, shall weigh
15 lb., and measure 17-1/4" W x 3-7/8" H x 14-3/4" D.
Architect
and Engineer
Specifications**
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel.: [phone] • Fax: [phone]
www.bogen.com
Technical
Specifications
Rear Panel
Output Level
Balanced: Selectable +4, -10, -50 dBμ
(typical with meter at “0”)
Unbalanced: 0 dBμ (typical with meter at “0”)
Max. Output Level
Balanced: +18 dBμ
Unbalanced: +20 dBμ
Frequency Response: +/- 1 dB (20 Hz to 20 kHz)
Distortion: 0.01% (@ +18 dBμ THD+N,
20-20 kHz BW Limited)
Signal-to-Noise
Fundamental: -99 dB*
w/ AUX MAX1R Module: -94 dB*
w/ MIC2X Module: -64 dB*
w/ TEL1S Module: -92 dB*
Tone Controls
Bass Frequency: 100 Hz (+/- 10 dB minimum)
Treble Frequency: 10 kHz (+/- 10 dB minimum)
Low Cut Frequency: 125 Hz @ -6 dB/octave
Signal / Clip Indicator
Signal Detect Threshold: 10 mV @ output of module
Signal Indicator Hold Time: 50 mS (green indicator)
Clip Detect Threshold: 6V @ output of module
Clip Detect Hold Time: 50 mS (red indicator)
Output Impedance
Balanced: 50 ohms @ +4 dBμ, 600 ohms
@-10 dBμ, 5 ohms @ -50 dBμ
Unbalanced: 100 ohms
AC Voltage: 120V~, 60Hz
Power Consumption: 21 watts
AC Power Receptacle: 500 watts maximum power,
unswitched
Dimensions:
17-1/4" W x 3-7/8" H x 14-3/4" D
Product Weight: 15 lb.
Safety Approvals: UL & cUL (U.S.A. & Canada)
* Referenced to 18 dBμ level, 20 - 20 kHz bandwidth limited.
** Architect and Engineer Specifications are available online in a
Microsoft® Word document to assist you with preparing your bids.