Specifications

Paging System
PCM2000
Product Features:
PCM2000
Modules Required For Zone Paging Applications:
*Note: One PCMPS2 Power Supply (not included) is required for each PCMCPU Module.
PCMTIM
PCMCPU*
PCMZPM
PCMTBM
Background Music:
• No interruption of background music in zones not
being paged
• Inhibit background music in any zone
• Zone modules can accept separate background
music sources
Night Ringer:
• Night Ring activated from 90V ring signal or contact
closure
• Night Ring tone can be selected as either simulated
ringer sound or chime
• Night Ring tone can be directed to a specific group
of zones
• RJ11 input connector
Code Calling:
• Code-Call capability using pleasant chime sound
• Code calling can be directed into a specific group of
zones
• Directly dial number of chimes produced or use
preset table of chime patterns
• 1 or 2 automatic replays of the code call
The PCM2000 Zone Paging System
provides robust zone paging for
applications requiring 1 to 99 zones,
and up to 32 paging zone groups.
Its multi-function modules ensure
flexibility and future expansion
with minimum time and expense.
PCMTBM
Talk Back Module
PCMTIM
Telephone Interface Module
PCMCPU
Central Processor Module
PCMZPM
3- Zone Module
Paging Features:
• Allows for 1 to 99 paging zones,
in 3-zone increments
• Up to 32 programmable paging zone groups
• Emergency All-Zone Override Paging input
• All-Call function can be disabled
• 250-watt power handling capacity (separate amplifier required)
• Works with systems that are central- or self-amplified, or mixed
• Drives up to 40 self-amplified speakers per zone module
in low-power mode
Installation Features:
• Operates with 70V and self-amplified (24V) paging systems
• Future expandability up to 99 paging zones using 10 PCM2000
slave assemblies
• Universal Telephone Interface allows simple connection to loop
and ground start trunks, to PBX or KEY paging ports, and to
analog 90V station lines
• Easy connections using standard RJ11 and Euro-style
terminal blocks
• Relay driver outputs mirror the operation of each paging zone to
control external equipment
• Two C-form relay contacts change state when system is
activated to control external equipment
• A setup tone can be produced by the system to check system
operation and volume levels
• Easy programming of system features through the telephone
• System programming can be reset to factory defaults
• Wall-mountable (brackets included)
• Registered under Part 68 of FCC rules
• ETL and C-ETL lsited
Works with both
central- and self-amplified
systems
www.bogen.com/documentindex
www.bogen.com
34
PAGING CONTROL
PAGING CONTROL MODULES
FREE DESIGN GUIDE
This system configuration
guide will assist you in
designing zone paging
applications.
It illustrates many popular applications for the
PCM2000. This valuable guide is available to
you at no cost. Download online at:
PCM2000
CONFIGURATION
GUIDE