Specifications are subject to change without notice. 50 Spring Street, Ramsey, NJ 07446 USA Tel: 201-934-8500 • Fax: 201-934-9832 www.bogen.com PRODUCT CATALOG 107 54-9215-01H 1003 © 2009 Bogen Communications, Inc. BOGEN COMMUNICATIONS, INC. INSTALLATION CASE STUDIES Bogen products have been used in numerous types of applications, each with its own unique requirements. Whether simple or sophisticated, installations around the world benefit from Bogen, Apogee, and NEAR® brand products.
ABOUT BOGEN TABLE OF CONTENTS Speakers & Accessories . . . . . . . . . . . . . . . pages 1–14 Easy Design/Easy Install Speakers Self-Amplified (24V) Systems . . . . . pages 15-21 . . . . . . . . . pages 22–29 Music & Input Sources, Microphones . . . . pages 55-60 Office Communications . . . . . . . . . . . . . . . pages 61-63 Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . page 30 System Design Guide Paging Control Charts (Amplifiers/Accessories) . . . . . .
PRO AUDIO LOUDSPEAKERS Professional Loudspeakers PRO AUDIO LOUDSPEAKERS AMT-15, AMT-12 The AMT-15 and AMT-12 speakers are designed to deliver high-output music and sound reinforcement in a cost-efficient package. The AMT-15’s robust 15-inch woofer offers rich, dynamic bass response down to 50 Hz. The 45mm compression driver diaphragm, comprised of a titanium alloy for added strength and rigidity, effortlessly handles the high input levels to match the woofer.
® NEAR ORBIT SPEAKERS Greater Coverage ® NEAR SPEAKERS NEAR Orbit Speakers offer an extremely wide, even coverage pattern up to 140 degrees. ORBIT Ceiling Speaker OCS1 Metal-Alloy Cone NEAR’s metal-alloy cone structures eliminate cone flex or "break up" in the operating ranges which have traditionally been a problem with conventional speakers that have a paper or plastic cone.
® NEAR ORBIT SPEAKERS Overhead Mounting The OPS1 was designed for use in open spaces or in pavilion-style structures where the ceilings are high but sound needs to be further down, closer to the audience/listener. Mounts Safely OPS1 OPS1W OPS1B (Off-white) (Dark Gray) ® The CK10 cable kit accessory (sold separately) can be used as a safety or main drop cable. This flexibility allows the speaker to be secured in a building in a variety of ways.
® ® NEAR SPEAKERS NEAR Armadillo Speakers Form follows function in the A-Series, a.k.a., the “armadillo” line. Its unique rounded ends and side corrugations, which give the speakers their characteristic “armadillo” shell look, are constructed of mineral-filled polypropylene. This dense molded material creates an extremely durable cabinet with excellent acoustic properties. Cabinet and components are impervious to salt spray and dust.
® NEAR A-SERIES LOUDSPEAKERS High-Output, Long-Throw Loudspeaker The NEAR A12 High-Output, Long-Throw Loudspeaker is the latest addition to the A-Series family of loudspeakers. Engineered to the same high standards, the A12 provides deep, rich bass and smooth highs as a complement to other NEAR loudspeakers.
SPEAKERS Wide Flange A wide mounting flange allows for easy mounting of the speaker in ceiling holes, even if roughly cut. Extra long integral mounting clamps swing into position, providing a snug and secure installation of the HFCS1/LP to the ceiling surface. CEILING SPEAKERS High-Fidelity Ceiling Speakers HFCS1, HFCS1LP Bogen’s coaxial 2-way, High-Fidelity Ceiling Speakers deliver unsurpassed HFCS1 performance and value.
CEILING SPEAKERS High-Fidelity Ceiling Subwoofer The Bogen CSUB Ceiling Subwoofer delivers outstanding bass response in both suspended ceiling and sheetrock installations. The CSUB can provide deep, rich bass response to any speaker system. Perfect accompaniments to the CSUB are Bogen’s HFSF1 and HFCS1/LP ceiling speakers, as well as NEAR’s OCS1 ceiling loudspeaker.
DROP-IN CEILING SPEAKERS Bogen's Drop-In Ceiling Speakers are full-range loudspeakers that allow fast and simple installation, which saves time, effort, and cost. Depending on whether your ceiling grid is 2' x 2' or 2' x 4', the speaker can be dropped directly into place or by simply making a single cut to the ceiling tile, placing the tile support rail, and then inserting the speaker into position. 70V and 25V Operation • 1ft. X 2ft.
CEILING SPEAKER ASSEMBLIES S86T725PG8W(U) Bogen ceiling speaker assemblies consist of an 8" cone speaker (S86 or S810) mounted in an enamel, steel-finished ceiling grille (PG8W or PG8U) with a transformer (T 725).
METAL BOX SPEAKERS SPEAKERS Metal Box Speakers MB8TSL, MB8TSLVR, MB8TSQ, MB8TSQVR MB8TSL Bogen’s Metal Box Speakers feature all-steel construction, surface-mounted enclosure with an 8" cone loudspeaker and 4-watt 70V/25V transformer. The MB8TSL is designed primarily for wall mounting, and its face is angled downward 12.5 degrees. The MB8TSQ is suitable for ceiling or wall mounting. “VR” versions include a recessed volume control.
FOREGROUND SPEAKERS FG-Series Speakers Product Features: • 15-, 20-, and 30-watt models • Smooth, wide frequency response • Compact and rugged plastic cabinets • Works with both 70V and 8-ohm speaker systems • U-Mounting bracket included • Rotary switch-selected power rating for 70V systems • Splashproof for use in damp environments (FG20S only) • FG15 available in Black (B) and Off-white (W) FG15B FG15W (Black) (Off-White) FG30, FG20S SPEAKERS The FG-Series of 2-way speakers is designed to deliver
HORN LOUDSPEAKERS SPEAKERS Special Protection The SPT15A, SPT30A, BDT30A and KFLDS30T use a cast aluminum end bell specially designed to make them weatherproof. A rotary selector switch is used to set the specific power tap for the speaker. This switch’s entry into the end bell is sealed by a special mounting nut with an integral O-ring. A removable plastic panel protects both the rotary switch and the electrical connections.
ATTENUATORS Bypass Feature AT10A, AT35A & ATP10, ATP35 Both Attenuator Series allow the output level of a group of loudspeakers to be set from a wall-mounted volume control, without affecting overall amplifier volume settings. The ATP-Series also has a priority bypass function which overrides the volume control knob to provide full volume audio to the speakers.
CONE SPEAKERS S86, S86T725, S86T725BR, S810, S810T725 SPEAKERS Bogen offers 8" Unmounted Cone Speakers with 6 or 10 oz. magnets, with or without speaker transformers. Product Features: • Works with both 70V and 25V amplifier outputs (models with transformers) • 8" cone speaker for excellent audio quality • Easy to install in wall baffles or ceiling grilles (see below) Model Speaker Magnet Weight Frequency Response S86 S86 6 oz. 50 Hz - 12 kHz S86T725 S86 6 oz.
EASY INSTALL /EASY DESIGN SPEAKERS ® TM Surface-Mount Ceiling Speakers SM1EZ (1W), SM4T (4W) Product Features: • No-Tool Installation. No tools needed; everything you need is right in the box. • Contemporary, Low-Profile Design. Looks good in any environment. • No Clean-Up. Installation means piercing ceiling tiles, NOT cutting them. So, there’s virtually no mess and no ceiling tile pieces to clean up. • SM1EZ is a one-watt, single tap speaker.
EASY DESIGN SPEAKERS TM Ceiling Speaker EASY DESIGN TM CS1EZ Bogen’s CS1EZ is a pre-assembled ceiling speaker comprised of an 8" cone speaker and steel ceiling grille painted with enamel. The CS1EZ includes a volume control knob and rear-mounted screw terminal board for easier electrical connection. Product Features: Dimensions Shipping Weight (6/carton) 13" dia. x 3-1/4" D 30 lb. / carton • Heavy-duty, wire-wound volume control with knob • 50 Hz-12 kHz frequency response • 95 dBspl @ 4 ft.
EASY DESIGN GUIDE TM What is Easy Design? 3 2 Find the number of speakers needed Select the amplifier for the system (see chart below) (see charts on pages 18-20) (see page 21) You supply some basic pieces of information – type of application, dimensions of the area to be covered, ambient noise level, and ceiling height*.
EASY DESIGN GUIDE (cont.) EASY DESIGN TM TM 2 Determine the Number of Speakers Needed CS1EZ Ceiling Speaker SM1EZ Surface-Mount Ceiling Speaker CS1EZ SM1EZ Use this chart to determine the number of CS1EZ Ceiling Speakers and/or SM1EZ Surface-Mount Ceiling Speakers a particular installation will require, based on the dimensions of the area and the ceiling height.
EASY DESIGN GUIDE (cont.) TM Horn Loudspeakers (HS7EZ, HS15EZ, HS30EZ) The number in BLUE is the typical number of horn loudspeakers the installation requires. Additional speakers may be needed in areas that have obstructions, like shelving, that block sound dispersion. The number in RED is the minimum amplifier power needed (in watts) for the installation. Example: A factory has 35,000 square feet of open area and an average ambient noise level of 80 dB. Thus, it will require HS15EZ Horn Loudspeakers.
EASY DESIGN GUIDE (cont.) EASY DESIGN TM TM 2 Determine the Number of Speakers Needed (cont.) WB1EZ Wall Baffle Speaker Use this chart to determine the number of WB1EZ speakers a particular installation will require, based on the dimensions of the area. Wall Baffle Speaker (WB1EZ) • Obtain the length and width of the area. • Where the length and width of the area crisscross on the chart, you will find the typical number of speakers that the installation requires.
EASY DESIGN GUIDE (cont.) TM Once you determine the number of speakers and the minimum amplifier power for the installation, you are ready to select the system amplifier. A 70V paging amplifier is very easy to select. • Locate amplifiers on the chart that have a wattage equal to or higher than the minimum amplifier power of your application. (Amplifiers with power capacities greater than this number will not damage the speakers. The extra power available is simply not used.
SELF-AMPLIFIED SYSTEMS SELF-AMPLIFIED (24V) SYSTEMS Bogen introduces the next generation in self-amplified (24V) paging equipment.
SELF-AMPLIFIED CEILING SPEAKERS Drop-In Ceiling Speakers Ceiling Speaker Assemblies These traditional style, recessed ceiling speakers are available with a fixed or detachable volume control knob.
SELF-AMPLIFIED SURFACE-MOUNT SPEAKERS SELF-AMPLIFIED SYSTEMS Easy Install® Ceiling Speakers ASM1 Bogen’s Self-Amplified Easy Install Speakers can be installed in a ceiling tile in less than a minute in any drop ceiling with standard ceiling tiles. Installation is a simple, three-step process that requires no tools. Simply pierce the ceiling tile with the specially-designed studs, use wing nuts to secure the speaker to the ceiling, and fasten wire nuts to make the 24V DC power and audio connections.
SELF-AMPLIFIED WALL BAFFLE SPEAKERS Wall Baffle Speakers SELF-AMPLIFIED SYSTEMS ASWB1 The ASWB1 Wall Baffle Speaker is an 8", cone-type loudspeaker, complete with a built-in amplifier and volume control, designed for telephone paging applications. It is engineered to provide excellent sound quality and trouble-free operation. Product Features: • Self-contained 1-watt amplifier • Simulated walnut finish with black grille cloth on front • Sloping front panel (13.
SELF-AMPLIFIED HORN SPEAKERS SELF-AMPLIFIED SYSTEMS High-Efficiency, Digital Switching, Horn Loudspeakers SAH5 (5W) , SAH15 (15W) , SAH30 (30W) Using digital switching amplifier technology, these Self-Amplified Horn Loudspeakers provide unprecedented low DC current draw and heat dissipation, allowing them to use fewer power supplies, run on longer cable runs, and work at higher ambient temperatures than conventional analog self-amplified horn speakers.
Determine Speaker Quantity Use the chart for the speaker you will use (SAH5, SAH15 or SAH30): 2. Locate the area's square footage. 3. Where these two measurements meet are two numbers. The number in GREEN is the number of speakers required. The number in RED is the number of Current Units (CU) needed for that many speakers. (You may need to increase the number of speakers in areas where large objects or shelving project into the coverage area, blocking sound.) SAH30 SAH15 SAH5 Current Units (min.
SELF-AMPLIFIED METAL HORN SPEAKERS SELF-AMPLIFIED SYSTEMS Traditional Metal Horn Speakers AH5A (5W) , AH15A (15W) The AH5A and AH15A Metal Horn Speakers are rugged, self-contained amplified paging horn assemblies that can be used for high noise paging areas indoors as well as for outdoor use. Their sturdy, weatherproof, all-metal construction allows them to withstand any environment while continuing to provide excellent audio intelligibility for paging and background music.
LEVEL CONTROLS Bypass Feature Buffer/Expander/Volume Control BUFEX Used with 24V systems, the BUFEX is a multi-purpose device that can work as a volume control for a network of speakers, and as a buffer that can drive up to 150 speakers. It also functions as a system expander when connecting to 100V, 70V, and 25V speaker systems. When the BUFEX’s Bypass feature is activated (by an external contact closure), it overrides the local level setting of the BUFEX and allows important messages to be heard.
POWER SUPPLIES POWER SUPPLIES Switch-Mode Power Supplies The SPS versions of power supplies use switching technology to provide large current capacities in very small packages. Unlike more conventional linear power supplies that use large and heavy transformers, switching supplies gate energy directly to the storage caps at the power supply output. This is a highly efficient way to convert voltages and because of this the power supplies generate very little heat.
SINGLE-ZONE TELEPHONE INTERFACE Single-Zone Universal Telephone Interface Bogen’s UTI1 is a single-zone telephone interface that is compatible with all standard analog port types. A background music (BGM) input with variable muting coordinates music and page announcements. An additional audio output provides a “page only” function (no BGM) for application flexibility. A built-in 24V DC, 1A power supply is provided for powering amplified speakers. Paging volume controls are provided for each of the outputs.
TELEPHONE INTERFACE PAGING CONTROL Double Duty The problem with selecting a telephone line interface device is knowing exactly what type of line will be available at the site. Because of mistakes in planning, a return trip to the supply house is not that uncommon. The TAMB was designed to eliminate this problem. The TAMB has the ability to interface to ground start, loop start, and analog ring-up lines.
MULTI-ZONE TELEPHONE INTERFACE Override Zone Group Bogen’s UTI312 is a multi-zone paging controller with universal telephone interface. It is expandable from 3 to 12 zones in 3-zone increments using ZX3 expansion modules. Each zone has its own buffered paging output (150 speaker drive capacity) with volume control, a C-form relay contact and “zone active” indicator. Each module includes a pluggable 24V DC power distribution terminal strip and pluggable terminal strips for each zone for easy wiring.
PAGING CONTROL MODULES PAGING CONTROL Paging System PCM2000 PCMTIM Telephone Interface Module The PCM2000 Zone Paging System provides robust zone paging for applications requiring 1 to 99 zones, and up to 32 paging zone groups. Its multi-function modules ensure flexibility and future expansion with minimum time and expense.
PCM2000 Modules: Signal Tones: PCMTIM Telephone Interface Module A universal interface connects to any type of telephone port, rapidly and trouble-free. Provides input for night ringer and emergency page override. One required per system.
ZONE CONTROL MODULE PAGING CONTROL Zone Groups One of the unique features of the ZPM3 is its ability to group together a number of zones and page in to them at the same time. Many times the functional layout of a facility dictates how the paging zones are arranged. However, the people you are trying to contact may spend their time in more than one zone area. By grouping zones, you increase your chance of contacting that person.
VOIP GATEWAYS FOR PAGING Network-Enabled Paging PAGING CONTROL MVP130BG, MVP210BG, MVP410BG, MVP810BG Bogen's Voice Over IP Gateways (VoIP) allow paging communications to be sent over the Internet or Intranet. Each gateway connects directly to Bogen paging systems and equipment to provide overhead paging to all locations within a facility or across a campus without running new lines.
AMPLIFIERS Signal-Processing Modules When signal-processing output modules are installed into the Power Vector's last two module bays, they automatically insert themselves into the mix bus signal path leading to the power amplifier stage. When two of these output modules are installed, their effects are cascaded with the second to last bay's module processing the signal first and then passing it to the module in the last bay.
ADVANCED INPUT MODULES Input Modules (Output Modules on Page 40) LINE/MIC INPUTS - LMM1S, LMR1S Actively Balanced Emulated Transformer Inputs STEREO AUX INPUT - SAX1R Unbalanced Stereo Input • Gain/Trim control • Bass & Treble controls • Gate feature mutes lower priority modules • Mutable by higher priority modules • Variable ducking level when muted • Fade back from mute • Stereo-to-mono summing option • Bus assignable • RCA connectors LMM1S MONO AUX INPUT - MAX1R Unbalanced Mono Input • Gain/Trim contr
ADVANCED OUTPUT MODULES AMPLIFIERS Signal-Processing Output Modules (Input Modules on Page 39) Bogen’s plug-in signal-processing output modules automatically insert themselves into the mix bus signal path leading to the power amplifier stage when installed. (Shipping weight: 1 lb. each.
PUBLIC ADDRESS AMPLIFIERS Dual Band EQ Gold Seal Series Amplifiers The unique dual-function equalizer can be used for acoustic shaping or for feedback control. • Acoustic Shaping - Full range equalization is provided for correcting general frequency response issues that exist in the application venue. The full audio spectrum is covered on 1-octave centers with a boost/cut of 12 dB.
PUBLIC ADDRESS AMPLIFIERS AMPLIFIERS Classic Series Amplifiers C10, C20, C10MOH C35, C60, C100 The Classic Series mixer amplifiers provide mixing of microphones, telephone, and auxiliary sources. Bogen’s Classic Series amplifiers offer high performance, flexibility, and reliability for most applications requiring a variety of inputs.
TELEPHONE PAGING AMPLIFIERS TPU250 Specialized Telephone Input TPU35B, TPU60B, TPU100B The TPU-Series’ 600-ohm transformer balanced input is perfectly suited to connect to paging ports and paging adapters such as Bogen’s TAMB. Here are a few specially designed features: TPU100B shown TPU15A Bogen’s TPU-Series of amplifiers are the ideal choice within the telephone paging industry.
DUAL-CHANNEL POWER AMPLIFIERS Black Max™ Power Amplifiers AMPLIFIERS X300, X450, X600 Bogen's Black Max amplifiers are designed to provide maximum performance in constant voltage speaker systems. Dual 70V transformerless outputs deliver exceptionally clean audio to speaker systems requiring two channels of audio up to 600W per channel, in a single package. High-efficiency class H amplifier design and the auto-sleep feature aid in reducing power consumption on continuously-powered systems.
DUAL-CHANNEL POWER AMPLIFIERS M-Class Amplifiers M300, M450, M600 Modular Amplifier Modes of Operation Each model includes a 3-position switch that can be set to one of three modes of operation: Stereo mode, 70V Mono mode, or Dual Mono mode.
MONO-CHANNEL POWER AMPLIFIERS AMPLIFIERS Heavy-Duty Operation The HTA line of amplifiers are designed to be workhorses. Large heat sinks and huge transformers allow these amplifiers to supply continuous, full (RMS) power to loads, even at high ambient temperatures – up to 120° F. The HTA amplifiers are convectioncooled, so they provide the ultimate in setand-forget operation. More amazing than the heavy-duty capability of the HTA amplifiers is the quality of the output.
PRO-MATRIX AMPLIFIER What Does The Pro-Matrix Do? Digitally Matrixed Amplifier PM3180 Removable front panel for optional wall mounting The Pro-Matrix was developed expressly for the needs of restaurants, lounges, fitness centers, and other venues that require numerous input sources but have areas with distinctly different audio requirements. The Pro-Matrix amplifier provides 3 fully independent audio channels that can use any of the 6 different inputs in vastly different ways.
MIXERS Flexible Output Levels The VMIX was designed to make connections to other sound system components as easy as possible. Its transformerbalanced output provides ground loop isolation and high noise immunity when connected to other balanced inputs of downstream components.
MIXERS MIC/LINE Mixers CAM8/CAM8PRO MIXERS CAM8 CAM8PRO The Bogen CAM8 and CAM8PRO are 8-input, dual-bus MIC/Line mixers that combine superb performance with a generous array of simple-to-use features in a single rack space design. Both models feature 8 independently assignable inputs switchable between MIC and Line. Each input has a trim control, a switchable low cut filter, and a Main/Auxiliary bus output selector. Phantom Power is provided for condenser microphones.
MIXERS MIXERS Mixer/Pre-Amplifier CAM2 The CAM2 is a 5-input mixer/pre-amplifier suitable for a wide variety of applications, particularly for expanding the number of inputs on Bogen or other public address amplifiers. The CAM2 provides four professional, low-impedance, balanced microphone inputs through XLR connectors and one auxiliary input. Individual phantom power switches for each input allow the use of both dynamic and condenser microphones on the same unit.
AMBIENT NOISE SENSOR SYSTEM ANS501 Bogen's Ambient Noise Sensor System electronically adjusts the level of a page or background music in applications where ambient noise levels are continuously changing. The ANS501 ensures that page announcements or background music are intelligible even during periods of high ambient noise levels. The system includes a sensor microphone module (ANS500M) that monitors the ambient noise level, and a 12V DC power supply.
PAGING ELECTRONICS Contact Closures & Paging Ports The VAR1 is ideally suited to provide a set of contact closures for paging ports of lower cost telephone systems that do not have a set of AUX contacts to trigger paging equipment. An adjustable trigger threshold keeps noise from falsely triggering the paging equipment, and the adjustable release delay (up to 25 seconds) keeps the paging system from dropping out in the middle of a page.
DIGITAL FEEDBACK ELIMINATION Break the Feedback Loop Digital Feedback Terminator The DFT120 eliminates the acoustical feedback loop created by the telephone handset and the paging speaker while providing high-capacity, high-quality recording and playback of audio pages.
DOOR PHONE Analog Door Phone TELEPHONE ELECTRONICS ADP1 Bogen’s ADP1 Door Phone provides convenient remote, hands-free two-way communication between two locations. Durable, weather-resistant, stainless steel construction protects against vandals and varying weather conditions. Product Features: Shown with bezel frame (included) Shown without bezel frame Connecting Amps to Other Equipment www.bogen.
MULTI-DISC CD PLAYER Output Connections The DCM290P provides separate stereo outputs via analog RCA connectors and digital optical and coaxial connectors. 5-Disc CD Player MP3/WMA Decoders This 5-Disc CD Player is capable of loading and removing discs without interrupting play. Plays audio CDs as well as CD-R/RW discs with MP3 and WMA files. A rack mounting kit is included. Playback Modes Audio track selection can be configured in a variety of ways for playback.
AM/FM 35-WATT RECEIVER MUSIC & INPUT SOURCES Paging Input Details The DRZ35 has a full-featured microphone paging input. The microphone input is a low-impedance balanced input that works with dynamic or condenser microphones. Whenever a page is made, the AUX or Tuner feed is muted via a VOX detector. When the page is completed, the other source smoothly fades back in. DRZ35 By using a WMT1A matching transformer, the MIC input can be connected to the paging port of a telephone system.
CD PLAYER & AM/FM RECEIVER Space Saving CDR1 The CDR1 is a combination CD Player and AM/FM Receiver. Dual Outputs Product Features: Actual product appearance may vary.
MICROPHONES MICROPHONES Bogen's microphone line includes a variety of types and styles (handheld, wireless handheld/lavaliere, desktop, gooseneck, boundary, and overhead hanging) to meet your application needs, from paging systems to instrument and vocal reproduction. These microphones provide clear, natural, intelligible sound reproduction with accurate response and dependable performance.
MICROPHONES HANDHELDS GOOSENECKS GCU250 Professional Handheld Stage Microphone Condenser Gooseneck Microphone The HDU250 is a dynamic microphone ideal for acoustically demanding environments. It features a heavy zinc die cast case with a rigid, low noise cable-mount system and a lockable silent reed switch. 7" D x 2 " dia.; 13 oz.
MICROPHONES MICROPHONES & ACCESSORIES OVERHEAD BOUNDARY WCU250 SCU250 Professional Overhead Hanging Microphone Professional Boundary Microphone The overhead WCU250 is a back electret condenser, professional microphone perfectly suited for picking up audio from large groups. Because it can hang from the ceiling and is compact in size, the WCU250 is very useful in minimizing visual distraction for the performers and the audience alike, and limits intrusion into the working space.
VOICE ENHANCEMENT SYSTEM ENHANCER 8 Pre-packaged systems provide effective voice reinforcement solutions for the most challenging room environments. ESYS1 The Bogen Enhancer is a dual-channel, Infrared (IR) Wireless Microphone System designed to enhance a presenter's voice in all areas of a room. IR Technology eliminates the interference and cross-talk from adjacent rooms that occurs in FM-based wireless products. Shipping Weight: 7 lb.
INTERCOMS Targeted Communication Desktop Intercoms Schools: A live news broadcast can be played over the system into all rooms. If an administrator needs a student, the call for the student can be placed directly into the classroom the student is in, without interrupting the live news broadcast to all the other classrooms.
TELECONFERENCE PHONE Teleconferencing Hub V•HUB OFFICE COMMUNICATIONS The V•HUB Conference Phone is a full-duplex, simultaneous, two-way communication conference phone that provides clean, clear sound for all of your teleconferencing needs. With three microphones, an easy-to-read recessed LCD display, 10 number speed dial, special calling functions, and a simple three-step setup process, the V•Hub Conference Phone is everything you could ask for in a conference phone... and more.
SYSTEM DESIGN GUIDE PAGING SYSTEM TECHNOLOGY The aim of a paging system is to deliver important audio announcements, at the proper level and with sufficient clarity, to people working in a facility and to make those announcements easily understood. The two most common ways to accomplish this are to use either 70V centralized amplifiers with passive speakers or self-amplified speakers operating from a 24V DC power supply. Pages 64-67 explain 70V systems and pages 68-69 explain self-amplified systems.
WHAT MAKES A 70V SPEAKER? Step-Down Transformer Taps The primary side of the step-down transformer (the side that connects to the amplifier) has a number of connections (called taps or power taps) that can be used to select the peak power the speaker will consume from the amplifier. Why Taps? The selection of the power tap has an effect on both the amplifier power needed for the system and the volume of the speaker. The more power a speaker consumes, the louder the sound from the speaker.
SYSTEM DESIGN GUIDE AMPLIFIER INPUT TYPES Auxiliary Input (AUX) Microphone Input (MIC) The Auxiliary input is the most common type of input used in paging. This input is designed to connect to most music sources, such as a CD player or tuner. Usually the connector for such an input is a Phono jack (also called an RCA jack). It connects to other equipment using standard audio cables. The traditional paging amplifier input is the Microphone input.
DESIGNING 70V SYSTEMS CEILING SPEAKERS To determine the number of ceiling speakers your installation requires, simply divide the area’s total square footage by the speaker coverage as indicated in this chart. WALL BAFFLE SPEAKERS To determine the number of wall baffle speakers your installation requires, simply divide the area’s total square footage by 600 square feet.
WHAT IS A SELF-AMPLIFIED SYSTEM? SYSTEM DESIGN GUIDE Self-Amplified Paging Systems consist of: • Self-Amplified Speakers each contain an individual, built-in, miniature amplifier that drives the speaker directly. Each speaker requires 4 wires. Two wires supply the raw 24V DC voltage to power the speaker’s internal amplifier and another 2 wires supply the low-level audio paging signal to the amplifier’s input. All amplified speakers contain volume controls to adjust output level.
WHAT MAKES A SELF-AMPLIFIED SPEAKER? Built-In Amplifier Bogen’s latest line of self-amplified horns use a revolutionary digital switching amplifier. Unlike conventional analog amplifiers, this advanced technology produces very little heat when it operates. It produces so little heat that all it needs to dissipate the waste heat are the copper interconnecting traces on the printed circuit board instead of the typical large aluminum heat sinks.
SPEAKER LAYOUT SYSTEM DESIGN GUIDE The layout of the speakers should be planned before installation begins. The spacing of the speakers can be adjusted so that the speakers are evenly spaced in a row. Some adjustments may need to be made due to sound obstructions that may be in the area such as high shelving, cubicle walls, etc. Ceiling Speakers Layout starts in one corner of the area.
SPEAKER LAYOUT Wall Baffle Speakers Chart for 70V & 25V passive speakers Ambient Noise Range Tap Setting Low Noise (55 dB - 65 dB) 1W Medium Noise (65 dB - 75 dB) 4W High Noise (75 dB - 85 dB) Very High Noise (85 dB - 95 dB) Chart for self-amplified speakers Ambient Noise Range Facing Speaker Distance Volume < 40 ft. Med 40 to 60 ft. High Low Noise (55 dB - 65 dB) SYSTEM DESIGN GUIDE The layout of the speakers should be planned prior to installation.
SYSTEM DESIGN GUIDE SITE SURVEY Designing a system and determining an installation’s requirements are quite simple. After you set up your first system, the steps will appear logical and soon the process will become routine. Before you begin designing or quoting a job, you will need some basic information regarding the site and the end-user’s needs. Use the Site Survey Check List below to ensure that you collect all the information you will need to complete the design of the paging system.
SPEAKER WIRING Speaker Wiring Patterns SYSTEM DESIGN GUIDE Because distributed paging systems involve a great number of speakers and long distances, the manner in which the speakers are wired is of interest. Deciding on how to wire the speakers depends on whether separate zones of speakers are needed, how many lines back to the amplifier are reasonable, and how easy it will be to troubleshoot the system in the future. How you wire a speaker system may require some tradeoffs.
SYSTEM DESIGN GUIDE WIRE TYPES Speaker Wire UTP The speaker wire best suited for paging systems is 2 conductors in a jacket. The gauge of the conductors varies depending on the installation. In many instances, a shielded version of the speaker wire is used. The shield can be useful to help protect the conductors from receiving electrical interference from other electrical equipment in the area.
WIRE-RELATED LOSSES There are different charts for centralized and self-amplified speakers to determine the maximum cable lengths that Wire Loss In Central Amplifier Systems Self-amplified systems are particularly sensitive to losses in the wire, especially the amount of supply voltage that is lost in the wires on the way to the self-amplified speaker. When the drop in the wiring becomes too large, the speakers may begin to distort or stop functioning altogether.
TELEPHONE INTERFACES www.bogen.com SYSTEM DESIGN GUIDE The most common way to make announcements over a paging system is through the telephone system. It is a convenient and readily available live input source. However, audio and telephone technologies are different. This sometimes makes it necessary to use an adapter to link the two systems together. 76 There are many types of telephone ports possible in telephone switches.
SOUND PRESSURE LEVELS CHART Typical Environments 95 dB Very High Noise 85-95 dB Speech Almost Impossible To Hear Construction Site Loud Machine Shop Noisy Manufacturing Printing Shop 85 dB High Noise 75-85 dB Speech is Difficult To Hear SYSTEM DESIGN GUIDE Typical Ambient Noise Level Assembly Line Crowded Bus/Transit Waiting Area Machine Shop Shipping/Warehouse Supermarket (Peak Time) Very Noisy Restaurant/Bar 75 dB 65-75 dB Must Raise Voice to be Heard 65 dB Low Noise 55-65 dB Speech is
78 www.bogen.
AMPLIFIER CHART www.bogen.
PRODUCT ACCESSORIES AMPLIFIERS Accessory Description Associated Model(s) Dimensions Prod. Page # Wt. GSRVC Remote Volume Control Gold Seal Series Amps GSTRC Gold Seal Series Security Cover Gold Seal Series Amps MA3 Module Adapter D-Series, WMA, DPA Amps PVMC Power Vector Module Cover V-Series Amps, M-Class, VMIX 1-1/2" W x 3-1/8" H x 3/8" D 1 oz. 38,45, 48 PVSC Power Vector Security Cover V-Series Amps, VMIX 15-1/2" W x 3-1/8" H x 1/2" D 2 oz.
BOGEN ENHANCER Model # Accessory Description Associated Model(s) Dimensions 2518 2520 18-Gauge Connector PI35A/SI35A 5/8" W x 1/4" H x 3/4" D 2 oz./30 62 20-Gauge Connector PI35A/SI35A 5/8" W x 1/4" H x 3/4" D 2 oz./30 62 2522 22-Gauge Connector PI35A/SI35A 5/8" W x 1/4" H x 3/4" D 2 oz./30 62 CA10A Call-In Switch PI35A/SI35A 2-3/4" W x 4-1/2" H x 2" D 2 oz. 62 CA11A Call Privacy Switch PI35A/SI35A 2-3/4" W x 4-1/2" H x 1-3/4" D 2 oz.
www.bogen.com FREE DESIGN SERVICE/PRODUCT LITERATURE FREE APPLICATION DESIGN SERVICE 82 Bogen’s Application Design Service was created to assist with the design of paging systems for any and every project encountered. It’s fast, comprehensive, and FREE. So let us design it for you! The Application Design Service provides: • Speaker Placement Design • Complete Bill of Material – This includes product description, model number, and quantity.
MODEL INDEX S86T725PG8U/WBRVR . . . . . . . . . . . . . . . . . . . . . . . .9 S86T725PG8U/WVK . . . . . . . . . . . . . . . . . . . . . . . . . . .9 S86T725PG8U/WVR . . . . . . . . . . . . . . . . . . . . . . . . . . .9 S810/T725 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 S810T725PG8U/W . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 S810T725PG8U/WVK . . . . . . . . . . . . . . . . . . . . . . . . . .9 S810T725PG8U/WVR . . . . . . . . . . . . . . . . . . . . . . . . . .
www.bogen.com INDEX CATEGORY INDEX 84 Accessories, Product . . . . . . . . . . . . . . . . . . . . . . . . .80-81 Ambient Noise Sensor Systems . . . . . . . . . . . . . . . .40, 51 Amplifier Features Chart . . . . . . . . . . . . . . . . . . . . . . . . .78 Amplifier Specs Chart . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-47 Amplifiers, Black Max Power . . . . . . . . . . . . . . . . . . . . . .
ABOUT BOGEN TABLE OF CONTENTS Speakers & Accessories . . . . . . . . . . . . . . . pages 1–14 Easy Design/Easy Install Speakers Self-Amplified (24V) Systems . . . . . pages 15-21 . . . . . . . . . pages 22–29 Music & Input Sources, Microphones . . . . pages 55-60 Office Communications . . . . . . . . . . . . . . . pages 61-63 Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . page 30 System Design Guide Paging Control Charts (Amplifiers/Accessories) . . . . . .
Specifications are subject to change without notice. 50 Spring Street, Ramsey, NJ 07446 USA Tel: 201-934-8500 • Fax: 201-934-9832 www.bogen.com PRODUCT CATALOG 107 54-9215-01H 1003 © 2009 Bogen Communications, Inc. BOGEN COMMUNICATIONS, INC. INSTALLATION CASE STUDIES Bogen products have been used in numerous types of applications, each with its own unique requirements. Whether simple or sophisticated, installations around the world benefit from Bogen, Apogee, and NEAR® brand products.
