Specifications

378
Audio/Video - Telephone
Industrial Extension Telephone Bell Ringer
A weather-resistant bell loud enough to be heard in the
noisiest factory or over extended distances outdoors, but
has an adjustable loudness control that makes it ideal
for a quiet patio or home. Can work in conjunction with your present phone
ringer or independently, if so desired. Sound pressure level is 95dB (excitation
20 Hz., 60 V, rms). Minimum operating voltage is 40 volts rms (20Hz) rated;
average less than 40 volts. Ringer impedance is more than 8K ohms at 20Hz.
Part # TEC49
Telephone Line Junction Box
A convenient, easy method of interfacing modular telephones to
the system in the home without going through complicated wiring.
Attachments are made at one to four color coded connecting
points. A modular plug and 24" cable connects to the standard
interface jack usually supplied by the telephone company.
Part # Description
TEC38 Ivory
TEC38AB Same as above without 24" cable, ivory. Bulk packed only.
TEC38WH White
5-Way Modular Outlet Box
Connects up to five telephones or related equip-
ment to an existing single modular jack. Four con-
tacts. Self-adhesive backing for convenient and
easy installation.
Part # TEC39
Universal Telephone Pick-Up Coil
Will pick up both sides of a telephone conversa-
tion for recording or amplification, on either the
old type phone or the modem new type phones.
Comes with rubber suction cup to enable easy attachment to any telephone
receiver, securely. Complete with 5 ft. of shielded cable.
Part # M81
De-Tangler
You will never have another tangled telephone cord. Simply
unplug your telephone cord from the handset and plug in the De-
Tangler. It can be plugged into the telephone handset or into the
telephone base. Fits all standard telephones with removable
cords and attaches in seconds. No tools required.
Part # UT24
2 Line "T" Adapter
This device plugs into 2 line wall jack and affords user Line 1,
Line 2 or both Line 1 and Line 2 female jacks. 4 conductor.
Part # TEC73
Phone Line RF Filter
This device will eliminate hissing, humming, scratching, false rings and radio
interference. It provides noise suppression and reduces electromagnetic inter-
ference. Ideal for cordless phones, answering machines, fax machines, data
communication and modems.
Part # TEC200
Home Theatre Designer
Wallplates & Jacks.
Part # Description
75-1026 4 gold RCA jacks (2 black and 2 red)
75-1032 4 gold 5-way binding post (2 black and 2 red)
75-1050 2 gold banana jacks (1 black and 1 red)
75-1052 4 gold banana jacks (2 black and 2 red)
75-1074 4 position push-in speaker terminal (solder terminals)
Cable and Telephone Patch Cords
Voice grade cables in round solid type for hardwiring and
flat stranded silver satin for cable assemblies. Modular
patch cords are cross-wired for telephone use.
Patch Cords
Part # Description
NCO-4107 4C - 7 ft. Tel. Cord Silver Satin
NCO-4115 4C - 15 ft. Tel. Cord Silver Satin
NCO-4125 4C - 25 ft. Tel. Cord Silver Satin
NCO-6207 6C - 7 ft. Tel. Cord Silver Satin
NCO-6215 6C - 15 ft. Tel. Cord Silver Satin
NCO-6225 6C - 25 ft. Tel. Cord Silver Satin
NCO-8307 8C - 7 ft. Tel. Cord Silver Satin
NCO-8315 8C - 15 ft. Tel. Cord Silver Satin
NCO-8325 8C - 25 ft. Tel. Cord Silver Satin
Voice Grade Cable
Part # Description
NBW-1426 2 Pr. (4C) 24AWG Round Solid Tel. Cable
NBW-1626 3 Pr. (6C) 24AWG Round Solid Tel Cable
NBW-1826 4 Pr. (8C) 24AWG Round Solid Tel. Cable
NBW-2428 4C 28AWG Flat Silver Satin Tel. Cable
NBW-2628 6C 28AWG Flat Silver Satin Tel. Cable
NBW-2828 8C 28AWG Flat Silver Satin Tel. Cable
NBW-1051 4P Cat5e 350MHz Solid UTP 24AWG
Category 5e Bulk Cable
4P Cat5e 350MHz Solid UTP 24AWG
Part # Color
NBW-1052 Blue
NBW-1053 Red
NBW-1055 Yellow
NBW-1056 Green
NBW-1058 White
NBW-1059 Gray