Specifications
397
Audio/Video - Microphones & Accessories
Professional Boundary Microphone
An unobtrusive, surface-mount, boundary, condenser micro-
phone ideal for meeting rooms, conferences and stage pro-
ductions where minimum visibility is ideal. Cardioid pickup
pattern. Full, rich reproduction of voice and music. Low sen-
sitivity to stage vibration and thumping noise. Phantom
power-operated. Low-impedance balanced output. Mounting keyways for hang-
ing or for secure attachment to the mounting surface. Heavy-duty metal case;
matte black finish. Outputs for interfacing with auxiliary equipment.
Part # SCU250
Microphone Stands
Part # Type Description
DS3 Desk Stand 3" chrome-finish tube 6" case iron base, 3 lb.
SB6 Floor Boom Stand Telescopic floor stand. Sliding 30" boom arm.
34" to 62" adjustable height, 6 lb. Chrome-
plated tubing. Tripod base.
SF4 Floor Stand 34" to 62" adjustable height. Round 10" diam-
eter die cast base, 9 lb. Grip-action clutch and
chrome-plated tubing.
Microphone Cables
Part # Cable Type Description
XLR25 Microphone Cable For use with handheld models HCU350,
HDU250, HDU150 and HDO100. Male XLR
to female XLR. 25' cable. Two-conductor
plus shield.
MAC Microphone Cable
Assembly
For use with handheld models HCU350,
HDU250, HDU150 and HDO100. Female
XLR to stripped and tinned wires. 25' cable.
Two-conductor plus shield.
Handheld Microphones
Handheld Public Address Microphone
Perfectly suited for public address applications and instru-
ment sound reproduction. 6 1/2" D x 1 1/2" dia. Omni-direc-
tional pickup pattern. Clean, clear reproduction with minimal ambient sound.
Low sensitivity to handling noise and stage vibrations. Lockable, silent on/off
reed switch. 500-ohm impedance. Frequency response range of 70 Hz - 15
kHz. Sensitivity of -72dB +/- 3dB. Internal rubber shock isolation system.
Rugged, reliable construction; includes mic clip. Rubberized black finish.
Part # HDO100
Handheld Stage Microphone
6 1/2" D x 1 1/2" dia. Cardioid pickup pattern. Low sensitivity to breath and
popping sounds. Lockable, silent on/off reed switch. 500-ohm impedance.
Frequency response range of 70 Hz - 15 kHz. Sensitivity of -70dB +/- 3dB.
Rubber shock-mount system for attenuation of handling and cable noise reduc-
tion. Rigid, low-noise cable-mount system. Rubberized black finish; durable ball-
shaped design; includes mic clip.
Part # HDU150
Professional Handheld Stage Microphone
Ideal for acoustically-demanding environments. Features a heavy zinc die cast
case with a rigid, low noise cable-mount system and a lockable silent reed
switch. 7" D x 2" dia. Cardioid pickup pattern. High output design with excel-
lent gain before feedback characteristics. High sound pressure capability with-
out distortion. Low sensitivity to breath/pop noise. Efficient shock-mount system
prevents handling and transmission noise. High sensitivity Neodymium capsule.
250-ohm Low impedance. Frequency response range of 50 Hz - 18 kHz.
Sensitivity of -72dB +/- 3dB. Integral multi-layer breath/wind filter; includes mic
clip. Rubberized black finish; rugged, reliable construction.
Part # HDU250
MediaStar™ GooseNeck Microphone
Attached to desk stand.
Part # 70-020
Microphone and Head Set
Part # Description
MMA-MFON-CLP Multimedia microphone, clip on
MMA-MFON-HD Multimedia stereo headset
MMA-MFON-TBL Multimedia microphone, table top
Handheld Microphones
(cont.)
Gooseneck Adjustable Desktop MIC
Momentary switch for priority paging. Six inch gooseneck
extension and five foot cord. Cannon 3 pin XLR male connec-
tor. Impendance is low-600 ohm and high 50 kHz. Sensitivity
high is 53dB ± 3dB and low 71 dB ± 3dB.
Part # MHL-5S
Double Channel Wireless Microphone
Professional hand held wireless microphone system has
two channels. It features an FM quartz locked VHF opera-
tion, auxiliary antennas, and wind screens. It is available
in four different VHF frequencies, Channels A-171.90
MHz, D-209.82 MHz, B-184.54 MHz, and F-203.30 MHz. Please be sure to
specify.
Part # MW-200H
Single Channel Dual Diversity Wireless Lapel Mic
Features an FM quartz locked VHF operation with an
Elecret condenser lapel microphone and headset. It is
available in four different VHF frequencies, channel A-
171.90, D-209.82, B-184.54, and F-203.30. The Elecret
condenser lapel microphone and headset are included.
Part # MWD-100L