Specifications

394
Audio/Video - Amplifiers & Accessories
Tone Generator
Designed to produce four different types of tones for use as
alarm or announcement signals in paging systems. An audio
signal can be routed through the tone generator to allow
easy installation in paging systems. During generation of the
tones, the routed audio will be suppressed. Tone generation reset available.
Adjustable tone level and pitch. 600-ohm output. Power requirements: Wide
power supply range, 12V to 48V DC @ 30 mA (power supply not included).
ProHold™ Digital Music-On-Hold (MOH) System
Provides music- or message-on-hold to callers placed on
hold. Easy for users to operate, eliminates call-backs to
installation sites. Simple one-step downloading from tape
to digital memory when tape is inserted. Automatically
determines audio start and stop points from inserted tape. 600-ohm transformer-
balanced output and 1W into 8-ohms output. Audio output can be connected to
a loudspeaker. Automatically reloads message on tape after power interruption.
Tape is stored in unit so it doesn't get lost. Comes with generic on-hold cassette
tape. Speaker, volume and trigger controls. Self-diagnostic test. Monitor speak-
er. Wall-mounting template and hardware included. Power requirements is 12V
AC/DC @ 800mA from 120V AC (power supply included).
Part # Message Storage Length
Pro12 12 minutes
Pro16 16 minutes
Pro4 4 minutes
Pro8 8 minutes
Part # TG4C
Contractor Series PA Amplifier
It features an auto mute function, music on hold out-
put with separate level control (600 ohm line and one
watt 8 ohm), 600 ohm telephone line input with level
control, bass and treble tone controls, front panel
level controls, and manual muting contacts. In addition to the telephone line
input, this unit accepts inputs from three sound sources. Each source can utilize
a choice of microphone inputs (terminal strip) or auto summing stereo auxiliary
RCA inputs. Mic 1 also contains an input for an XLR connector. Outputs include
a choice of 4, 8, and 16 ohm as well as 70 and 25 volt line outputs. There is an
auxiliary output connection as well. Watts amplifier is 120.
Part # PBM-120
Solid-State Stereo Pre-Amplifier
An economical way of using stereo tape recorders and mag-
netic stereo cartridges on amplifiers with low gain phono
inputs originally intended for crystal or ceramic types.
Numerous uses. Fast plug-in RCA connectors. Solid state,
printed circuit design. Frequency response is 30-20,000 Hz equalized for phono
RIAA playback curve. Low impedance up to 70,000 ohms to match all type
heads and magnetic cartridges. Maximum output is 0.5V (less than 1% distor-
tion). Output load is from 10,000 ohms to 1 meg-ohm. Cross talk is under
40dB. Power supply is 117V AC 50-60Hz.
Part # PRE600
VC Series Mic/Line Mixers
4 or 8 channel VCA based mixing. Voltage controlled attenuators offer flexible
level control and won't "click" or "pop" after years of use. Studio quality com-
pression and limiting. Remotely control volume and mixing functions using an
external 10kOhm potentiometer. Peak and average mixing. VC Series is stan-
dard version. VCX is enhanced version - models include individual channel sig-
nal present and clip LEDs, master output VU metering, APHEX™ Aural Exciters
and an insert patch or direct out for all channels.
Part # Description
4001VC 4-Channel Standard VC Series
8001VCX 8-Channel VCX Enhanced Series
AMIX Series Automatic Mic/Line Mixers
4 or 8 channel automatic mixing. Automixing pro-
vides maximum gain before feedback by attenuat-
ing the output level by -3bD every time the number of active channels doubles.
Three automatic modes. Using an external switch, remotely mute all channels
except the priority mic. Optional RS232 and ReO control. Small compact
design. Quick, simple linking interface.
Part # Description
AMIX-8 8-channel
AMIX-4 4-channel
Distribution Amplifiers
Part # Support Connectors Size
AVDA-8-F Supported Intelix baluns 9 RJ45 1 x 8
HDDA-8-F High-definition component video,
composite video, Y/C video, or
analog audio
27 RCA 1 x 8
VGADA-2 VGA 3 HD15 (VGA) 1 x 2
MC Series Mic/Line Mixers
MC/Series mic/line mixers give you the flexibility and studio quality features of a
dual bus console in a single rack space. All models offer studio quality compres-
sion/limiting and feature recessed selector switches for bussing of input signals
to the main, AUX, or both outputs. Features: 8x2 Mic/Line Mixer, Bus selectors
per channel, phantom power, output compressor/limiter, low cut filters per input,
headphone output, three models, linkable.
Part # Description
8002MCB-FP With XLR connectors and all trim and pad controls on
the front panel
8002MCB-PHNX With Phoenix Connectors
8002MCB-XLR With XLR connectors
Audisey Athena
Audisey Athena combines the performance of a true matrix mixer with the flexi-
bility and digital signal processing of a digital amplifier–all in a single, intuitive
package. Available in 8 inputs by 8 outputs or 16 inputs by 16 outputs, the
Athena features built-in audio preamplification, input signal processing, true
matrix mixing, output signal processing, and either eight or sixteen channels of
independent power amplification. The Athena provides users with up to 128 sys-
tem presets, 16 input DSP presets per channel, and 16 output DSP presets per
channel via the front panel, USB, serial, or over the internet. Real-time event
scheduling software and an embedded web server provide sophisticated control
options.
Part # Description
Athena-8 Features 8 inputs, 8 monitor outputs, and 8 amplifier outputs
with up to 100 watts per channel (400 watts total)
Athena-16 Features 16 inputs, 16 monitor outputs, and 16 amplifier out-
puts with up to 100 watts per channel (800 watts total)