Specifications

384
Audio/Video - Speakers & Accessories
Wall Baffle Speakers
8" cone speakers pre-assembled into a simulated walnut-fin-
ished wooden enclosure with a black grille cloth on front.
Handsomely styled and ruggedly built with 3/8" particle board
reinforced at the corners. Four-watt capacity. Six different
power taps available (4, 2, 1, 1/2, 1/4, 1/8 watts). Works for
both 70V and 25V amplifier outputs. 6 oz. or 10 oz. magnet
weights. Easy wall-mount installation. Mounting hardware included.
Dimensions (W x H x D) is 9 1/2" x 9 1/2" x 5 1/4" (3 1/4" depth at bottom).
Part #
Magnet
Wght
Freq.
Response
Sensitivity (4
ft/1W)
Features
WBS810T725 10 oz. 70 Hz - 15
kHz
96 dBspl No volume
control
WBS8T725 6 oz. 50 Hz - 12
kHz
95 dBspl No volume
control
WBS8T725BR 6 oz. 50 Hz - 12
kHz
95 dBspl Screw termi-
nals
Vandal-Resistant Speakers
Ensures that sound communications gets through reliably, despite
being located in environments susceptible to damage and destruc-
tion. Assembly includes a 3" plastic cone speaker, securely located
and protected behind steel barriers. Grille openings are cross-posi-
tioned so that nothing can enter the speaker. Mounts with one-
way security screws (included). 1/2-watt speaker power on 25V
speaker line. Optional low impedance 8-watt speaker operation.
Dimensions (W x H x D) in inches are 5 1/2 x 7 3/4 x 1 3/4.
Part # Description
VRS1 Unbreakable metal call-button
VRS2 Without call button
Surface-Mount Easy Install™ Ceiling Speakers
Carries voice message with clarity anywhere depend-
able communication is required. No tool installation.
Contemporary, low-profile design. Two specially-
designed mounting studs easily pierce standard ceiling
tiles up to 2" thick which means no clean-up. Two cus-
tom-designed, easy-to-handle wing nuts provide a secure mounting for the
speaker to the ceiling tile. Durable ABS plastic shell. For use on 70V systems.
Wire-wound volume control is an integral part of the design. Wide dispersion of
sound. Diameter is 9 1/2". Depth is 3" from tile surface. Frequency response is
125 Hz - 15 kHz. Sensitivity is 90 dBspl (1 watt @ 1 meter).
Part # Description
SM1EZ One-watt, single tap speaker
SM4T
Four-watt, multi-tap speaker with settings of 4, 2, 1, 1/2 and 1/4
watts - Settings are rotary-switch selectable (there are no trans-
former wires to deal with)
WBS8T725BRV 6 oz. 50 Hz - 12
kHz
95 dBspl Recessed
volume con-
trol & screw
terminals
WBS8T725V 6 oz. 50Hz - 12
kHz
95 dBspl Recessed
volume con-
trol
Easy Design™ Ceiling Speaker
Pre-assembled ceiling speaker comprised of an 8" cone
speaker and steel ceiling grille painted with white enamel.
Includes a volume control knob and rear-mounted screw
terminal board for easier electrical connection. One-watt
single-tap design. Screw terminal connections for fast
installation. Designed for 70V amplifier output. Dimensions
are 13" diameter x 3 1/4" depth. Frequency response is 50
Hz - 12 kHz. Sensitivity is 95 dBspl @ 4 ft/1W input.
Part # CS1EZ
Easy Design™ Horn Loudspeakers
Made of weatherproof all-metal construction. Ideal for both indoor
and outdoor use. All models come with swivel and tilt mounting
bases for greater flexibility in setting the angle of projection.
Single-tap design. HS7EZ features 12" lead wire for electrical
connections. HS15EZ and HS30EZ feature screw terminal con-
nections for fast installation. Designed for 70V amplifier outputs.
Stepped attenuator volume control. Textured mocha enamel.
Part # Frequency Sensitivity Dispersion Dimensions
HS15EZ 275 Hz - 14
kHz
121 dBspl (4
ft/15W) input
(@1 kHz)
110° 9" dia. x 9 1/4" d
HS30EZ 225 Hz - 14
kHz
125 dBspl (4
ft/30W) input
(@1 kHz)
11" dia. x 10
1/2" d
HS7EZ 250 Hz - 14
kHz
105 dBspl
(4ft/7.5W)
input (@1
kHz)
120° 6" dia. x 4" d
Easy Design™ Wall Baffle Speaker
Pre-assembled with an 8" cone speaker enclosed in a simulated
walnut-finished wooden enclosure with a black grille cloth on
front and a recessed volume control. One-watt single-tap
design. Screw terminal connections for fast installation.
Designed for 70V amplifier output. Recessed volume control.
Frequency response is 50 Hz - 12 kHz. Sensitivity is 95 dBspl @ 4 ft/1W input.
Dimensions (W x H x D) are 9 1/2" x 9 1/2" x 5 1/4" (3 1/4" depth at bottom).
Part # WB1EZ
100°
Sound Columns
Provides effective sound reinforcement for installations with large areas,
using a minimum number of speakers. Each column has a vertical array
of speakers. Works with 8-ohm speaker systems. Four 5" speakers
(SCW20) or six 6" speakers (SCW35). Controlled sound projection.
Uniform sound level. Reduced feedback. Clear and intelligible speed
reproduction. Polarized screw terminals. Acoustically lined, particle
board construction: 3/8" (SCW20), 1/2" (SCW35). Simulated oil walnut,
black grille. Mounting hardware included.
Part #
Max.
Power
Cap.
(W)
Freq.
Response
Sensitivity
(dBspl@1W)
Dispersion
Angle
Dim.
(W x
H x D)
SCW20 20 80 Hz - 14
kHz
100 Vert-45, Hor-
90
7 1/2"
x 20"
x 5"
SCW35 35 70 Hz - 16
kHz
105 Vert-25, Hor-
120
9 1/2"
x 42"
x 6"
Drop-In Ceiling Speakers
Full-range speaker is quick and easy to install. 2'x2' design
fits into 2'x2' and 2'x4' suspended ceiling tile spaces (support
rail crossbar included for 2'x4' ceilings). Finely perforated
grille covers entire front of speaker panel. Fully enclosed,
industrial grade steel construction. Front-mounted, recessed
volume control. Self-contained 1-watt amplifier. 8" main cone speaker. Non-
reflective white finish. Complies with UL-2043. 23-7/8"Wx5"Hx23-7/8"D.
Part # ACD2X2
Tile Bridge
Load-bearing support. Designed to mount behind a
ceiling tile, this steel bridge will distribute the weight of a
speaker, grille and protective enclosure onto the ceiling
grid. Dimensions (W x H x D) 23 3/4" x 3/4" x 14 1/2".
Part # TB8