Specifications

381
Audio/Video - Intercoms & Doorphones
2-Way 3 Channel Wireless Intercom System
offers the convenience of a page call button and option
of hands-free operation. In addition you have your
choice of different volume levels and three separate
communication channels allowing future system expan-
sion. Connected by your in-wall, common AC electrical
line, just plug the two units into linked outlets to start instant communication, no
complicated wiring is needed. Ideal for inter-house communication or vestibule
security clearance, the FM-201A is a compact, wide-range, feature-rich solution.
Part # FM-301A
Wired Intercom Systems
Single channel wired two station intercom with out-
door weatherproof remote transistorized solid state
circuitry. Complete with 9 volt battery and 50' of cable
ideal for door answering.
Part # BI-2WD
Single channel wired two station intercom transistorized
solid state circuitry. ON/OFF volume control with 9V
battery and 50' of cable ideal as an economical
"babysitter".
Part # BI-2SD
Wired Intercom Systems
Two station wired door answering system. Door release
button for use with optional electric door release operates
on 4 C cells or PSW-1, 6V DC adapter (optional). Door sta-
tion dimensions (HxWxD) are 4 1/2" x 3 1/4" x 1 1/4".
Master station dimensions (HxWxD) are 7 1/4" x 4 3/4" x 1
1/2". Total weight is 1 1/4 lbs.
Part # WI-150
Additional 2-wire door remote station.
Part # WI-DR
FM Wireless Intercom Set
Ideal for home or office and is simply installed by plugging the
power cord into an AC outlet. Three separate channels.
Service free, FM/PLL (phase-locked-loop) circuitry, assures
that your voice communications are crisp and clear. Includes a pair of inter-
coms. Operates on standard AC current with low power consumption (less than
a 3 watt light bulb) additional features include solid state LED indicators, beep
call for altering other stations and a squelch feature noise. Maximum range is
1000 feet. Measurements (W x D x H) in inches are 7 x 4 1/4 x 2 (178 x 121 x
51 mm).
Part # 30-6035
Audio/Video - Speakers & Accessories
Cone Speakers-8 Inch Speaker (6oz Magnet)
Works with both 70V and 25V amplifier outputs (models with
transformers). 8" cone speaker for excellent audio quality.
Easy to install in wall baffles or ceiling grilles. Magnet weight
is 6 oz. Frequency response is 50 Hz-12 kHz. Sensitivity is
95 dBspl. Connections are Push-on Lugs. 8" Dia.x3-1/4"D.
Drop-In Ceiling Speakers
Finely perforated grille over entire front of speaker. Fully
enclosed, industrial grade steel construction. For use with 2'
x 4' and 2' x 2' suspended tile ceilings. Plenum-rated - meets
requirements of UL standard 2043 for smoke and heat
release. 8" main cone with secondary high frequency cone.
Non-reflective white finish blends in with ceiling tiles. Seismic attachment point.
Part # Dimensions
CSD1X2 12-7/8" W x 23-3/4" H x 5"D
CSD2X2 23-13/16" W x 23-13/16" H x 5"D
Part # S86
High-Fidelity Ceiling Speaker
Bogen's coaxial 2-way, hi-fi ceiling speakers deliver unsur-
passed performance and value. Installs into a variety of ceiling
environments including suspended ceilings and hard-surfaced
ceilings. Large heavy-gauge plated steel back can for deep
bass response. Computer-matched dual venting system for full
bass output. For 16-ohm, 70V, and 100V systems. Dimensions
are 12"D x 12-3/8" diameter. The product weight is 9 lb.
Part # HFCS1
ORBIT Ceiling Speaker - 12” Diameter
Features NEAR's unique MLS™ and MDT™ technologies which
improve sound quality and increase operating reliability. 140-
degree wide-dispersion coaxial driver for broad, even coverage.
Stable, high-definition metal-alloy woofer cone. 6-1/2" MDT
metal-alloy cone delivers detailed sound; 3/4" polycarbonate tweeter. MLS voice
coil centering system. High-efficiency drivers deliver superior performance. For
16-ohm, 70V, and 100V systems. Frequency response: 60 Hz to 19 kHz.
Part # OCS1
ORBIT Pendant Speakers
Specially designed to provide full-range bass in open space envi-
ronments. Easy-to-use cable suspension system includes three
suspension cables with attached forged eyebolts. 140-degree
wide dispersion coaxial driver for broad, even coverage. Stable,
high-definition metal-alloy woofer cone. 6-1/2" MDT metal-alloy
cone delivers detailed sound; 3/4" polycarbonate tweeter. For 16-
ohm, 70V, and 100V systems.
Part # Description Dimensions
OPS1B Dark Grey 9-1/4"Dx15" diameter
OPS1W White 9-1/4"Dx15" diameter
Amplified Speakers
Built-in amplifier with volume control. Requires 24V DC and a
low-level audio signal. 8" cone speakers available in ceiling
mount, wall baffle mount or unmounted versions. Two horn
speaker power levels, 5W and 15W. Volume control on all
speakers. Perfect for small or large paging systems.
Part # ASWG1DK