Data Sheet

TECHNICAL SPECIFICATIONS
Balanced Input Module (BAL2S)
Gain 0 dB (or +18 dB; switch
selectable per channel)
Frequency Response +0/-3 dB, 5 Hz-100 kHz
S/N (20 Hz - 20 kHz) -100 dBV
Distortion < 0.005%, 20 Hz-20 kHz
Input Impedance 10k ohms (unbalanced)
20k ohms (balanced)
Ducking (level) -10 dB to -48 dB
CMRR > 80 dB @ 1 kHz
Controls Ducking
Priority Lowest or none
Connector 6-position barrier strip
Dimensions 1-3/8" W x 3-1/8" H x 3-1/2" D
Weight 2.8 oz.
All measurements at 0 dB gain.
Bridging Input Module (BRG1R)
Gain -5 dB to 5 dB
Frequency Response +0/-3 dB, 5 Hz-100 kHz
S/N (20 Hz - 20 kHz) -100 dBV
Distortion < 0.005%, 20 Hz-20 kHz
Input Impedance 10k ohms (balanced)
Output Impedance 200 ohms (pseudo-balanced)
Ducking (level) -10 dB to -48 dB
Gate Threshold 3 mV to 30 mV
Gate Duration 0.5s to 5s
CMRR > 60 dB @ 1 kHz
Priority Four levels
Controls Gain, Ducking,
Gate Threshold,
Gate Duration
Connector RCA Type
Dimensions 1-3/8" W x 3-1/8" H x 3-1/2" D
Weight 2.3 oz.
0 dB
0 dB
+18 dB
+18 dB
2
INPUT
ATTEN.
+
_
GND
MIC/LINE
INPUT
MIC/LINE
LINE/MIC Input Module (LMM1S)
Gain 18 dB to 60 dB (MIC)
-2 dB to 40 dB (LINE)
Frequency Response 20 Hz to 50 kHz (+0/-3 dB)
S/N (20 Hz - 20 kHz) -76 dBV @ 60 dB gain
Distortion < 0.01%
Input Impedance 15K LINE mode
2K MIC mode
Gate Threshold 2 to 25mV @ min. gain
Gate Duration 0.5s to 5s
Priority Four levels
Tone ± 10 dB @ 100 Hz & 10 kHz
CMRR > 80 dB @ 1 kHz
Controls Gain, Bass, Treble,
Threshold, Duration
Connector Pluggable Euro Screw Type
Dimensions 1-3/8" W x 3-1/8" H x 3-1/2" D
Weight 2.2 oz.