Specifications

90
Order Online
www.mcmelectronics.com
NET 30
Terms
4
Professional
Audio
section
4
Gold Seal Series
Mixer Amplifiers
Designed specifically with the Sound Contractor in
mind, Gold Seal Series amplifiers combine unique
and useable features with ultra high reliability
and pro performance at a minimum price. Available in
60W, 100W, 150W and 250W models, there is a perfect
fit for any application. Aphex
®
Aural Exciter Circuit
adds presence and intelligibility to vocals when
paging. The dual function 10 band equalizer
can be used for feedback control or acoustic shaping,
providing ±12dB of boost or cut from 62.5Hz~16KHz
in acoustic mode and from 125Hz~8KHz in feedback
control mode. Other features include automatic level
control, automatic muting with a VOX circuit, and
a variable mute level. Inputs: Six Lo-Z balanced
microphone, 2 Hi-Z auxiliary sources and a telephone
paging input (Mic 5 is switch-selected for mic or
telephone line; Mic 6 is switch-selected for microphone
or Aux 1). Mics 1 through 4 use XLR-type connectors,
Aux input is via RCA phono jacks and all other
connectors use screw terminals. Phantom power
is supplied for use with condenser microphones.
Microphone precedence connections are included for
mic 1, 2, 3, 5/Tel, 6/Aux 1 and Aux 2. Outputs: •Taps
for 4ohm and 8ohm speakers, and for 25V, 25VCT,
70V and 100V line •Line out for booster amp and tape
recorder •Preamp out/power amp in loop is provided
to insert signal processing equipment Specifications:
•Frequency response: 20Hz~20KHz •THD: 0.3%
•S/N ratio: -94dB or better (-60dB or better mic
inputs 1~6) •Dimensions: 3
1
⁄2" (H) x 16
1
⁄2" (W) x 12" (D)
•Three-year warranty
Order # Model # Description (ea.)
555-3520 GS-60 60 watt $479.00
555-3525 GS-100 100 watt 554.00
555-3530 GS-150 150 watt 641.00
555-3535 GS-250 250 watt 837.00
60W RMS Power Amplifier
Solid-state power amplifier has been designed to fulfill
the requirements of professional and commercial
sound systems utilizing 8ohm, 16ohm, 25V or 70V
distributed speaker systems. Single input amplifier
is ideal when external mixing or preamplifier is used,
and it is perfect for expanding an existing system.
It accepts unbalanced line level inputs, and may be
driven directly from another amplifiers 25V or 70V
output. Rear panel controls include input level adjust,
selectable low–cut filter and accessory AC outlet.
Specifications: •Power output: 60W RMS
•Frequency response: 20Hz~20KHz •THD: <2% at
rated output •Dimensions: 3
1
⁄
2" (H) x 15
1
⁄
4" (W) x 8" (D)
Order # Description (ea.)
555-7960 Amplifier $459.00
Matching Audio Transformer
General purpose matching
transformer allows proper
connection between high and
low impedance inputs and outputs.
Bi–directional device may be used to
balance an unbalanced line, or provide
isolation between two pieces of equipment.
It may also be used to produce a balanced
mic level signal from a line level source
such as a CD, DVD or tape player, or
computer sound card. Primary: 10Kohm,
RCA type male connector. Secondary: 600ohm
center tapped, with screw terminals. Steel
enclosure measures 2
3
⁄8" (H) x 2" (H) x 1
1
⁄4" (D)
and includes mounting ears.
Order # Mfr. # (ea.)
555-2855 WMT1A $30.79
AM/FM Receiver/PA Amplifier
Unique, self-contained paging
system combines a digital tuner, microphone and
auxiliary inputs with a 35W PA amplifier. PLL
synthesized tuner and LCD display provide accurate
frequency selection and may be programmed with up
to 18 FM and 12 AM preset stations. Microphone
input accepts a balanced Lo-Z input, via standard
three-pin connector, and has its own volume control,
switchable ALC and VOX muting of the program from
tuner or aux source. RCA type aux input accepts
signal from any line level source. Pre-page output lets
you route tuner or auxiliary program to a telephone
music-on-hold input. The output is not affected by
volume, bass or treble settings, nor will it pass a page
signal from the mic input. Speaker outputs include
4ohm, 8ohm 25V and 70V line. Includes FM dipole
and AM loop antenna. Dimensions: 12.05" (W) x
8.46" (D) x 3.43" (H). Mfr. #RM350D.
Order # (ea.)
555-3620 $386.00
AM/FM Stereo Tuner
Ideal as a background music
source in sound systems of all sizes. Digital PLL
synthesized tuner provides 87.5~107.9MHz FM and
530~1620KHz AM reception. Allows presets of up
to 18 FM and 12 AM stations. Output provided
via RCA female connections. Includes AM loop and FM
dipole antennas. Also includes stereo patch cable and
stereo–to–mono patch cable. Requires 120VAC, 8W.
Dimensions: 10.55" (W) x 7.17" (D) x 1.65"
Order # Mfr. # Description (ea.)
555-3625 TP350D AM/FM tuner $228.00
555-2876 RPK46A Rack mount kit 29.95
6 Watt Compact Amplifier
This compact utility amplifier
features a built–in mixer for the two independent
inputs. One accepts Lo-Z balanced or unbalanced
microphone, the second (AUX) input accepts line level
signals. Internally adjustable tone control allows you
to contour the amplifier to your situation. Ideal for a
variety of applications such as background music in a
doctor’s waiting room, relaying fast-food restaurant
orders from counter to kitchen or sound reinforcement
in a small church. The unit is protected by both
thermal and over-current circuit breakers. Outputs:
•8ohm •25V •70V Specifications: •Output power:
6W RMS, from 75Hz~15KHz, with not more than 2%
THD •Dimensions: 2
5
⁄8" (H) x 8
1
⁄2" (W) x 6" (D)
•Mfr. #GA-6A
Order # (ea.)
555-3605 $147.00
Classic Series
Compact Amplifiers
Compact rugged PA amplifiers are perfect for small
paging and background music applications. Units
provide outputs for conventional 4/8/16ohm speakers,
as well as distributed 25V and 70V systems. Inputs
allow connection of microphones, line level source
devices and telephone systems for signal activated
paging. Features: •Lo–Z balanced MIC-1 input
•Switchable MIC-2/Aux input •Contact muting of
AUX input •Transformer isolated 600ohm telephone
input •VOX muting of AUX input by the telephone
input •Front panel controls for MIC-1, MIC-2
and treble level •Discrete complimentary output
transistors for reliability Specifications: •THD: <1%
at rated power •Frequency response: 70Hz~16KHz
•Output connections: Screw terminal •Input
connections: Screw terminal, RCA female for AUX
•Dimensions: 2
7
⁄8" (H) x 11
3
⁄8" (W) x 7
3
⁄8" (D)
Order # Model Power Output (ea.)
80-1310 C10 10W RMS $167.00
80-1315 C20 20W RMS 199.00
Classic Series Amplifiers
This rugged PA amplifier series is perfect for paging
and background music applications in public areas
including offices and retail space. Units provide
outputs for conventional 4/8/16ohm speakers, as well
as distributed 25V and 70V systems. The 4ohm output
bypasses the output transformer, allowing improved
frequency response. Four inputs allow connection of
microphones, line level source devices and telephone
systems for signal activated paging. Features: •Lo–Z
balanced MIC input •Hi–Z AUX input •Telephone
input •Switchable MIC/Aux input •Contact muting
of AUX input •Bass and treble controls •AUX muting
by external contact closure •Transformer isolated
600ohm telephone input •VOX muting of AUX
input by the telephone input •Line level output for
recording or external booster amplifier •Front panel
controls for MIC-1, AUX/MIC-2, AUX, bass and treble
level •Discrete complimentary output transistors for
reliability Specifications: •THD (4ohm output):
<0.5% at rated power •THD (others): <1% at rated
power •Frequency response (4ohm output):
20Hz~20KHz •Frequency response (others):
70Hz~16KHz •Output connections: Screw terminal
•Input connections: Screw terminal, RCA female for
AUX •Dimensions: 3
3
⁄4" (H) x 14
1
⁄2" (W) x 11" (D)
Order # Model Power Output (ea.)
80-1320 C35 35W RMS $279.00
80-1325 C60 60W RMS 349.00
80-1330 C100 100W RMS 399.00
1.5 Watt Utility Amplifier
Ideal for music-
on-hold or line
amplification,
the Bogen
Model GA-2
is a rugged,
compact 1.5
watt amplifier
designed to
meet the
requirements of
continuous low-
power audio applications. It can also be used to drive
monitor speakers, headphones, or as a line amplifier.
High-impedance input is available via phono jack
or screw terminals. Only 50mV is required for
full output. A choice of 8ohm or 600ohm output is
provided. Screwdriver adjustable volume control
is provided on the chassis. Sturdily constructed of
galvanized steel (#20 gauge). The amplifier is compact
and easily mounted on a wall or in any convenient
location. Dimensions: 5
1
⁄2" (W) x 4
1
⁄8" (H) x 2
1
⁄2" (D).
UL listed. Mfr. #GA-2.
Order # (ea.)
555-3600 $94.95
C52_pg_090 8/8/07 8:48 AM Page 90