Specifications

4
125
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
125
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
Professional
Audio
section
4
Two Channel Wireless
Microphone System
Low cost wireless mic system is ideal for close range
situations where two mics are needed. VHF high
band operation (232~261MHz) and super heterodyne
receiver ensure good performance in karaoke and
presentation situations. System includes a
two–channel receiver, which simultaneously
accepts the signal from the two included wireless
microphones. Mic channels have independent level
controls. Mics operate on standard 9V batteries
(#292-035), two included, which typically provide
eight hours of operation. Features: •Detachable mic
antennas •Auto mute circuitry •Two color display
shows signal and AF level •XLR and
1
⁄4" mixed output
are provided Specifications: •Range: 50' normal
conditions, 100' max •110/220VAC operation
Order # Mfr. # (1-3) (4–up)
35-1860 PDWM2300 $84.95 $77.25
Two Channel UHF Wireless
Microphone System
The ideal wireless mic system when performance is
critical. Four user selectable frequencies (per mic)
ensure interference free operation regardless of the
location. Features: •UHF PLL synthesized operation
•Rugged all metal housing •Sleek metal carrying
case •Detachable receiver antennas •Advanced
companding circuitry •Individual balanced XLR mic
outputs •
1
⁄4" mixed unbalanced output •Operating
range up to 300' •13 hour battery life •Frequency
range (mic A): 564~575MHz •Frequency range
(mic B): 545~554MHz •Includes
1
⁄4" audio cable
and rack hardware •110/220VAC operation
Order # Mfr. # (1-3) (4–up)
35-1865 PDWM8000 $249.00 $231.75
Four Channel Wireless
Microphone System
Low cost wireless mic system is ideal for close range
situations where four separate microphones are
needed. 1RU rack mount receiver houses four
independent VHF receivers. VHF operation
(210~280MHz) and super heterodyne receiver ensure
good performance in karaoke and presentation
situations. Microphones operate on a standard 9V
battery (#292-035), not included, which typically
provide eight hours of operation. Specifications:
•Range: 50' normal conditions, 100' max •Frequency
response: 50Hz~15KHz •Receiver output: Fixed level
balanced XLR, and variable level unbalanced
1
⁄4" (mic
level) •Power requirements: 110/220VAC
Order # Mfr. # (1-3) (4-up)
35-1790 PDWM5000 $149.00 $138.12
Four Channel Wireless
Microphone System
Low cost wireless mic system is ideal for close
range situations where four separate microphones
are needed. 1RU rack mount receiver houses four
independent VHF receivers. VHF operation
(210~280MHz) and super heterodyne receiver
ensure good performance in karaoke and
presentation situations. The set includes
two hand held microphones and two beltpack
transmitters. Each beltpack transmitter may be
used with either the lapel clip mic, or headset mic,
both included. Microphones operate on a standard
9V battery (#292-035), not included, which typically
provide eight hours of operation. Specifications:
•Range: 50' normal conditions, 100' max •Frequency
response: 50Hz~15KHz •Receiver output: Balanced
XLR line level, unbalanced
1
⁄4" (mic level), also
provided is a separate unbalanced
1
⁄4" mic output
for MIC1 only •Power requirements: 110VAC,
AC adaptor included
Order # Mfr. # (1-3) (4-up)
35-1792 PDWM4300 $129.00 $119.00
Two Channel Wireless
Microphone System
Low cost wireless mic system is ideal for close
range situations where two separate microphones are
needed. Each mic includes an internal rechargeable
battery pack, with the receiver acting as a drop in
charger. VHF operation (232.4~261.0MHz) and super
heterodyne receiver ensure good performance in
karaoke and presentation situations. Specifications:
•Range: 50' normal conditions, 100' max •Frequency
response: 50Hz~15KHz •Receiver output: Fixed level
balanced XLR, and variable level unbalanced
1
⁄4"
(mic level) •Power requirements: 110/220VAC
Order # Mfr. # (1-3) (4-up)
35-1780 PDWM3000 $89.95 $83.39
UHF
True-Diversity
Wireless
Microphone
System
True diversity
receiver, and ten
user-selectable
frequencies,
ensure silent, interference-free operation from this
solid performing mic system. PLL tuning provides
drift free reception and advanced companding
circuitry enables increased dynamic range, for
outstanding performance from this low cost
system. Specifications: •Operating frequency:
736.0~750.0MHz •Range: 75' normal conditions,
150' max •Frequency response: 50Hz~20KHz
•Receiver output: Fixed level balanced XLR,
and variable level unbalanced
1
⁄4" (mic level)
•Power requirements: 110/220VAC
Order # Mfr. # (1-3) (4-up)
35-1785 PDWM4000 $115.00 $106.60
Professional 1000 Watt
Rack Mount Amplifier
Professional sound reinforcement amplifier provides
175W RMS x 2 channels, 500W maximum x 2
channels into 8ohm, with THD better than 0.05%.
Features include: •Bridging capability •A/B
speaker selector •LED clipping indicator •Heavy-
duty binding post speaker connections •RCA and
1
⁄4"
input connections •Heavy-duty aluminum heatsinks
with cooling fan •Switchable 110/220V operation
Specifications: •Output at 4ohm 1000W x 2
channels •Frequency response: 10Hz~50KHz •S/N
ratio 90dB (A-weighted) •Speaker impedance
4~16ohm •Dimensions 19" (W) x 5
1
⁄8" (H) x 13" (D)
•Mfr. #PA1000X
Order # (ea.) (2-up)
555-4060 $229.00 $213.21
Professional 600 Watt
Rack Mount Amplifier
Professional sound reinforcement amplifier provides
95W RMS x 2 channels, 300W maximum x 2
channels into 8ohm, with THD better than 0.05%.
Features include: •Front panel left and right
gain controls •A/B speaker selector •LED clipping
indicator •Rack mount chassis with handles
•Heavy-duty binding post speaker connections
•RCA and
1
⁄4" input connections •Heavy-duty
aluminum heatsinks •Switchable 110/220V
operation Specifications: •Output at 4ohm
600W x 2 channels •Frequency response
•10Hz~50KHz •S/N ratio 90dB (A-weighted)
•Speaker impedance 4~16ohm •Dimensions
19" (W) x 5
1
⁄8" (H) x 13" (D) •Mfr. #PA600X
Order # (ea.) (2-up)
555-4055 $165.00 $152.96
Professional 800 Watt
Rack Mount Amplifier
Professional sound reinforcement amplifier provides
140W RMS x 2 channels, 400W maximum x
2 channels into 8ohm, with THD better than 0.10%.
Features include: •Front panel left and right gain
controls •Left and right lighted analog dual range
VU meters •A/B speaker selector •LED clipping
indicator •Rack mount chassis with handles
•Heavy-duty binding post speaker connections
•RCA and
1
⁄4" input connections •Heavy-duty
aluminum heatsinks with cooling fan •Switchable
110/220V operation Specifications: •Output at
4ohm: 800W x 2 channels •Frequency response
•10Hz~50KHz •S/N ratio 90dB (A-weighted)
•Speaker impedance 4~16ohm •Front panel
dimensions: 19" (W) x 5" (H) •Chassis dimensions:
16
1
⁄2" (W) x 5" (H) x 12" (D) •Mfr. #PA800X
Order # (ea.) (2-up)
555-3180 $205.00 $190.55
C52_pg_125 8/8/07 9:20 AM Page 125