Unit installation

6.2.2 Parallel Time Share

In this configuration the incoming phone line is split via a ‘line splitter’ device.

(Available at most electronic/hardware stores). One line is physically connected

to both devices, like the phone extensions in your home. You could have your

studio set the ProHold DRDX to one (1) ring answer but restricted to Mondays

from 5:00 p.m. till 5:00 a.m. All other times the USER Equipment would actu-

ally pick up the line (user equipment should be set to pick up on 2 to 3 rings)..

6.2.3 Distinctive Ring

Using the ‘line splitter’ setup as above, the ProHold DRDX can also be option-

ally configured to recognize distinctive ring from the CO for incoming line

pickup. This option requires distinctive ring to be enabled on the users phone

line but has the advantage of allowing ProHold DRDX to positively answer

any time the Base Station calls.

6.3 PBX/KSU Station Line

PBX/KSU Station Line connection places the ProHold DRDX at an internal

extension attached to your PBX/Key System. This extension MUST be a stan-

dard analog phone extension with talk battery provided. The extension need not

have a direct dial number (DID), the B-mail software can find its way past

almost all auto-attendant type programs. In this case both the main phone num-

ber AND the extension must be provided to your studio.