Spec Sheet

NETWORKED 2-CHANNEL
AUDIO POWER AMPLIFIERS
Models NQ-A2060, NQ-A2120,
NQ-A2300
FEATURES
• 1 dedicated Balanced Line Input (both Phoenix plug & XLR)
• Line Input that can be routed-out over the Nyquist network
• Network-based audio input (paging, audio distribution)
• 4 ohm, 8 ohm, 25V, and 70V outputs
• GUI based DSP control
- 16-band Graphic Equalizer
- Signal Present and Clip Monitor
- Adjustable High Pass, Low Pass, and Bandpass Filters
- Noise Gate
- Compressor/Limiter
- 7-band Parametric Equalizer
• Switch selectable 2-channel or 1-channel bridged operation
• Safety: CAN/CSA C22.2 No. 62368-1:2014;
UL62368-1:2014; EN 62368-1:2014
• EMC: FCC Part 15b Class A; ICES-003,Issue 6: 2016;
EN 55032:2012; EN 55035:2017
• 1/2 Rack Width - Wall, Rack, or Shelf mountable –
1RU and 2RU packages
• 19” Rack Mount Kit (NQ-RMK03; sold separately)
DESCRIPTION
Bogen’s Nyquist based networked audio power ampliers offer cost-effective performance for permanent installations and com-
mercial sound, and are designed to meet the rigorous requirements of today’s sophisticated sound systems. Designed with the
commercial sound contractor in mind, they provide unparalleled exibility and versatility without the need for add-on modules. They
offer state-of-the-art, built-in DSP software for extensive and comprehensive signal processing, including factory loudspeaker presets,
which turns the amplier into a complete audio solution.
These 2-channel ampliers are available in 120, 240, and 600-watt models, each with the same features to provide power and perfor-
mance, no matter how large or small the application.
In addition to their extensive exibility, the Nyquist networked audio power ampliers use the latest in Class D amplier technology
and provide unparalleled sonic quality, exceptional reliability, and reduced heat output for increased operating eciency.
The C4000 Series is built upon Bogen’s award winning Nyquist software-based IP communications platform,
which provides users with unparalleled exibility and scalability in whatever their application.
Models NQ-A2060 & NQ-A2300 shown
A & E SPECIFICATIONS
The Nyquist based two channel amplier shall be a model _____, rated at ____ watts RMS per channel (NQ-A2060/2x60 watts,
NQ-A2120/2x120 watts, and NQ-A2300/2x300 watts) with switch selectable 2-channel or 1-channel bridged operation. The amplier
shall have one dedicated Balanced Line Input with both Phoenix plug & XLR connections. The amplier shall provide a frequency
response from 20-20 kHz +/- 0.25 dB at rated power. Distortion shall be less than 0.03%. The amplier shall include GUI based DSP
controls; 16-band Graphic Equalize; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass, and Bandpass Filters;
Noise Gate; Compressor/Limiter; and 7-band Parametric Equalizer. Outputs shall be provided for 4-ohm, 8-ohm, 25V, and 70V distrib-
uted systems. The amplier shall be rack mountable 1/2 Rack Width - Wall, Rack, or Shelf mountable 1RU and 2RU packages or by
using a 19” Rack Mount Kit (NQ-RMK03; sold separately). It shall carry the necessary safety agency listings for both the United States
and Canada. The amplier shall employ convection air cooling. Ampliers that require fans for cooling shall not be considered equal.