Spec Sheet

NETWORKED 2-CHANNEL
AUDIO POWER GEN 2 AMPLIFIERS
Models NQ-A2060-G2,
NQ-A2120-G2, NQ-A2300-G2
FEATURES
• 1 dedicated Balanced Line Input (both Phoenix plug & XLR)
• Line Input that can be routed-out over the Nyquist network
• Network-based audio input (paging, audio distribution)
• 4 ohm, 8 ohm, 25V, and 70V outputs
• GUI based DSP control
- 16-band Graphic Equalizer
- Signal Present and Clip Monitor
- Adjustable High Pass, Low Pass, and Bandpass Filters
- Noise Gate
- Compressor/Limiter
- 7-band Parametric Equalizer
• Switch selectable 2-channel or 1-channel bridged operation
• Safety: CAN/CSA C22.2 No. 62368-1:2014;
UL62368-1:2014; EN 62368-1:2014
• EMC: FCC Part 15b Class A; ICES-003,Issue 6: 2016;
EN 55032:2012; EN 55035:2017
• 1/2 Rack Width - Wall, Rack, or Shelf mountable –
1RU and 2RU packages
• 19” Rack Mount Kit (NQ-RMK03; sold separately)
DESCRIPTION
Bogen’s Nyquist based networked audio power ampliers offer cost-effective performance for permanent installations and commercial
sound, and are designed to meet the rigorous requirements of today’s sophisticated sound systems. Designed with the commercial
sound contractor in mind, they provide unparalleled exibility and versatility without the need for add-on modules. They offer state-of-
the-art, built-in DSP software for extensive and comprehensive signal processing, including preloaded Bogen NEAR loudspeaker presets,
helping to optimize speaker performance and sound quality. Customers can also create and save their own speaker presets to ne tune
the audio to their specic listening environments.
These 2-channel ampliers are available in 120, 240, and 600-watt models, each with the same features to provide power and perfor-
mance, no matter how large or small the application.
In addition to their extensive exibility, the Nyquist Networked Power Ampliers use the latest in Class D amplier technology and pro-
vide unparalleled sonic quality, exceptional reliability, and reduced heat output for increased operating eciency.
Models NQ-A2060-G2 & NQ-A2300-G2 shown
A & E SPECIFICATIONS
The Nyquist based two channel amplier shall be a model _____, rated at ____ watts RMS per channel (NQ-A2060-G2/2x60 watts,
NQ-A2120-G2/2x120 watts, and NQ-A2300-G2/2x300 watts) with switch selectable 2-channel or 1-channel bridged operation.
The amplier shall have one dedicated Balanced Line Input with both Phoenix plug & XLR connections. The amplier shall provide
a frequency response from 20-20 kHz +/- 0.25 dB at rated power. Distortion shall be less than 0.03%. The amplier shall include GUI
based DSP controls; 16-band Graphic Equalize; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass, and Bandpass
Filters; Noise Gate; Compressor/Limiter; and 7-band Parametric Equalizer. Outputs shall be provided for 4-ohm, 8-ohm, 25V, and 70V
distributed systems. The amplier shall be rack mountable 1/2 Rack Width - Wall, Rack, or Shelf mountable 1RU and 2RU packages or by
using a 19” Rack Mount Kit (NQ-RMK03; sold separately). It shall carry the necessary safety agency listings for both the United States
and Canada. The amplier shall employ convection air cooling. Ampliers that require fans for cooling shall not be considered equal.
The E7000 Series is built upon Bogen’s award winning Nyquist software-based IP communications platform,
which provides users with unparalleled exibility and scalability in whatever their application.